Does Curt C49CR Fit 2021 Mazda CX-30

Question

Question:

Mazda CX-30 2021. Is C49CR the exact 1 1/4 fit for this car. Site did not ask me what trim my car had, in my case its a premium but not the trubo its 2.0liter, 185hp. Please clarify for me , thx

asked by: Bob

1

Helpful Expert Reply:

Yes the Curt 1-1/4 inch hitch part # C49CR is a confirmed fit for your 2021 Mazda CX-30 Premium. It actually fits all models.

expert reply by: Jameson C

1

Answer 1

The Curt Trailer Hitch Receiver #C49CR has been confirmed to fit all models of your 2021 Mazda CX-30. This Class I hitch is designed for light duty towing and is rated for a maximum of 2,000lbs trailer towing and 200lbs of tongue weight, which far…

view full answer...

Answer 2

I recommend the EcoHitch Hidden Trailer Hitch Receiver #EH55VR for your 2020 Mazda CX-30. This will receiver is custom fit for your Mazda and is capable of supporting the 3 bikes you need to carry. The Thule Helium Pro 3 Bike Rack #TH9043PRO is the…

view full answer...

Answer 3

While there are trailer hitches that fit your 2021 Mazda CX-30, I checked with the hitch manufacturers, and there are no 2 inch hitch options for the vehicle. You do have an option for a trailer hitch that fits your '21 CX-30, but it is a Class I…

view full answer...

Answer 4

The Curt Trailer Hitch Receiver part #C49CR is an excellent option for a 2020 Mazda CX-30. It has a hidden design which means the receiver tube opening will be tucked up right under the rear bumper which will make for not only the best aesthetics but…

view full answer...

Answer 5

The Draw-Tite Sportframe Trailer Hitch Receiver #DT64MR has been confirmed to fit all models of your 2021 Mazda CX-30 including your Turbo model and it does not require any drilling either! If you were in need of trailer wiring as well the Tekonsha…

view full answer...

Answer 6

The Draw-Tite Trailer Hitch #DT64MR you were looking at for your 2021 Mazda CX-30 can be used to tow a small trailer as long as it weighs less than 2000lbs and has a tongue weight of less than 200lbs. With that said Mazda calls out in the owner's…

view full answer...

Answer 7

I do have a solution for you but the only trailer hitch options we offer for a 2023 Mazda CX-30 are class 1, 1-1/4" like the Curt Trailer Hitch Receiver part #C49CR which is what I recommend. That said, as you mentioned you can use a 1-1/4"…

view full answer...

Answer 8

The trailer hitch that I recommend for your 2022 Mazda CX-30 is the Curt Trailer Hitch Receiver #C49CR. This hitch is made in the USA, has a bolt-on, no-drill installation and will provide you with a Class I, 1-1/4" hitch receiver for hitch…

view full answer...

Answer 9

You are correct that a trailer hitch is the best option for carrying 3 bikes with your 2021 Mazda CX-30. The trailer hitch that you need is the EcoHitch #EH55VR because the other options are Class I rated and those are only strong enough to carry 2…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Does Curt C49CR Fit 2021 Mazda CX-30

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching