Do Curt Trailer Hitch and Wiring from 2021 Mazda CX-30 Also Fit 2022 Model

Question

Question:

I have a 2022 mazda cx 30, are there any difference between the 2021 and 2022 for a trailer wire harness and a trailer hitch? I dont see many options for 2022

asked by: Jamie

0

Expert Reply:

The trailer hitches that fit your 2022 Mazda CX-30 like the Curt # C49CR also fit the 2021 models. This also true for the Curt trailer wiring harness part # C86CR that you referenced.

expert reply by: Jameson C

0

Answer 1

We do have the T-One Vehicle Wiring Harness #TK67FR from Tekonsha which is designed to fit your 2021 Mazda CX-30. I have linked an installation video below for this on a 2022 CX-30 which shows it working with a Tester #I26.

view full answer...

Answer 2

The Draw-Tite Sportframe Trailer Hitch Receiver #DT64MR has been confirmed to fit all models of your 2021 Mazda CX-30 including your Turbo model and it does not require any drilling either! If you were in need of trailer wiring as well the Tekonsha…

view full answer...

Answer 3

The most likely cause for the incorrect behavior of your trailer lights, where activating one turn signal causes all trailer lights to blink, is an insufficient ground (or a short to ground) on either the vehicle or the trailer. Since you re-wired…

view full answer...

Answer 4

I recommend the Draw-Tite Trailer Hitch Receiver #DT44YR as the best for your 2022 Mazda CX-30. The receiver has a 2" opening allowing for a larger selection of hitch mounted accessories and ball mounts. It uses a hidden cross tube allowing for…

view full answer...

Answer 5

First, use a circuit tester like #PTW2993 on your trailer connector as a helper activates each lighting function and operates the manual brake switch on the brake controller. This helps isolate the problem to the trailer or the tow vehicle. If…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 12

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...