Determining Which Size Screws Should Be Used To Install Tow-Rax Strap Hanger TWSP25SHA
Question:
what size tek screws do you recommend to mount these type of hangers to enclosed cargo trailers? there is a 1/4inch thick wood interior skin and then what is the size of the metal tubing behind it in a normal car hauler trailer?
asked by: Steve
Expert Reply:
The Tow-Rax Strap Hanger - Aluminum - 17" Long x 4-1/2" Tall x 3" Deep # TWSP25SHA you were looking at does not have holes already in it for mounting, so you will need to drill the holes to the size of the screws you are using.
Since this is just for storing straps and is not a tie down point any size screws will be fine, but getting one or two into the metal framing on the trailer wall will be the best choice to make sure it stays secure for years to come.
There is not a standard size of tubing using to frame a trailer, so you will want to error on the side of using a shorter screw than a longer screw. Since you mentioned that the trailer has 1/4" wood I wouldn't use a screw much longer than 1/4", as if you use too long of a screw you could drill through the exterior wall as well.
I included a video review of the # TWSP25SHA for you to take a look at.
Product Page this Question was Asked From
Tow-Rax Strap Hanger - Aluminum - 17" Long x 4-1/2" Tall x 3" Deep
- Trailer Cargo Organizers
- Hooks and Hangers
- Strap Hanger
- 3 Inch Wide
- 4-1/2 Inch Tall
- Contracting
- Landscaping
- Recreation
- 17 Inch Long
- Drilling Required
- Tow-Rax
more information >
Continue Researching
- Shop: Tow-Rax Removable Wheel Chock w/ Wood Screws - 6-1/2" Wide Tires - Tubular Steel - Chrome
- Q&A: Installation Methods for Brophy Recessed Trailer D-Ring Tie Down with Backing Plate # RR5K
- Shop: Brophy D-Ring Tie Down Anchor w Backing Plate - Bolt-On - 1/2" Wide - Recessed - 1,600 lbs
- Q&A: Brophy D-Ring Compatibility with 1/2 Inch Plywood Decking
- Q&A: Installation of Brophy Recessed Trailer D-Ring Tie Down # RR5K on Toy Hauler Wood Floor
- Q&A: Hole Diameter Recommendation for Installing Brophy D-Ring Tie Down Anchor # RR5K
- Q&A: Is There a Torque Figure for Brophy Swiveling D-Ring Anchors w Backing Plates and Hardware # RR6K-4
- Q&A: What Diameter Hole Needs to be Cut for the Brophy D-Ring Recessed Tie Down
- Video: Brophy Swiveling D-Ring Anchor with Backing Plate and Hardware Review and Installation
- Video: Brophy Swiveling D-Ring Anchor with Backing Plate and Hardware Installation - Enclosed Trailer
- Video: Brophy D-Ring Tie Down Anchor with Backing Plate Review
- Shop: Brophy Rope D-Ring Tie-Down Anchor - Bolt-On - 2-1/4" Wide - Surface Mount - 1,600 lbs
- Shop: Rack'Em Fitz-All Enclosed Trailer Ladder Rack
- Shop: Tow-Rax Removable Wheel Chock w/ Hardware - 6-1/2" Wide Tires - Tubular Steel - Chrome
- Shop: CargoSmart Recessed D-Ring Tie-Down Anchor - Bolt On - 3/8" x 2-1/8" - 1,667 lbs
- Shop: Brophy Swiveling D-Ring Anchors w Backing Plates and Hardware - Bolt-On - 2,000 lbs - Qty 4
- Search Results: tow rax
- Search Results: tow tax
- Search Results: brophy d rings
- Search Results: rr5k
- Search Results: e~track
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Video: etrailer Horizontal E-Track Review
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: jack
- Shop: Trailer Wiring
- Article: Trailer Tire Sizing
- Article: Most Popular Wheel Bearings
- Search Results: trailer jack