How To Use TorkLift Super Truss For 2" Hitches In TorkLift SuperHitch TLD1111-30 For 2020 Ram 3500

Question

Question:

Im thinking about getting a super hitch for my truck but I also need a super truss extension to pull my boat with while my camper is on. When I look at the super hitch it has a2.5in reciever and the extension is set up for a 2in receiver. Do you make the extensions that are made for the 2.5in reciever?

asked by: Steve S

0

Expert Reply:

We have just what you are looking for.

The TorkLift SuperHitch Magnum Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2" and 2" # TLD1111-30 you were looking at has a 2-1/2" upper receiver and a 2" lower receiver, and an adapter to reduce the 2-1/2" receiver down to 2".

To be able to use the TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers - 24" Long # TLE1524 you will need to use the reducer mentioned above. With your hitch this extension will have a 750lb tongue weight rating and 7500lb trailer weight rating, or a 1400lb tongue weight rating and 14000lb trailer weight rating when using a weight distribution hitch.

I included a video of the # TLE1524 for you to take a look at.

expert reply by: Samuel C

0

Answer 1

for your 2013 Ford F-150 the TorkLift SuperHitch Hero Trailer Hitch Receiver - Custom Fit - Class IV - Dual 2" Receivers #TLF1005H will partner with the factory hitch on your truck. It is designed for 6-1/2 foot bed trucks which is what it…

view full answer...

Answer 2

If you install the Torklift Superhitch Magnum part #TLD1111-30 on your 2019 Ram 3500 that currently has the rear tie down part #TLD3112 and a factory hitch you would need to replace the tie down with the part #TLR3510 according to Torklift. So yes…

view full answer...

Answer 3

Thanks for the picture! To use the TorkLift SuperTruss Hitch Extension 48" Long item #TLE1548 with your 2022 Ram 3500 you are going to want the TorkLift SuperHitch Magnum Trailer Hitch Receiver item #TLD1111-30. This hitch is custom fit and…

view full answer...

Answer 4

The TorkLift SuperHitch Magnum Trailer Hitch Receiver #TLD1112-30 does come with the dual receivers so you will have to remove the factory hitch from your 2020 Ram 2500 for this install. I reached out to my contact at TorkLift to confirm this and he…

view full answer...

Answer 5

For a 24 inch 7-way extension designed for what you are looking to do you would want the Torklift Wiring Harness Extension part #TLW6024. For an adapter to convert this to a 4-way you would want the part #PK12716.

view full answer...

Answer 6

Yes we have the solution for you. TorkLift SuperHitch Magnum Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2" and 2" part #TLD1111-30 is a confirmed fit for your 2019 Ram 3500 dual rear wheel as long as it has the factory hitch. This…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

How To Use TorkLift Super Truss For 2" Hitches In TorkLift SuperHitch TLD1111-30 For 2020 Ram 3500

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching