Determining Which Replacement Wheel Studs Fit Dexter Hub and Drum Assembly
Question:
I have a 2003 Coleman Bayside Elite with Dexter Axle and I need new Trailer Hub Wheel Studs? I saw the review on the Part #7-122. Will those fit my Hub or do I need a different Part. I have attached a photo of the inside of the hub with the part number for the entire unit. Thanks.
asked by: Jeff B
Expert Reply:
I would be happy to help you find the correct replacement wheel studs for your hubs, but unfortunately the part number shown in your picture are for the brake assemblies and not the hub.
To determine the correct replacement wheel studs you will need to remove one of the studs and measure it. There are quite a few locations where you will need to measure the stud, and you will need to use digital calipers like # PTW80157 to get a very precise measurement.
I included a diagram of where to measure your wheel stud, and if you can provide the these measurements I would be happy to confirm the correct wheels studs for you.
Products Referenced in This Question
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Trailer Hub Wheel Stud - Drive In - 1/2" Diameter x 2" Long - Qty 1
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Studs
- 1/2 Inch Diameter
- Drive-In Stud
- 2 Inch Long
- Redline
more information >
Continue Researching
- Shop: Trailer Hub Wheel Stud - Drive In - 1/2" Diameter x 2" Long - Qty 1
- Q&A: Replacement Wheel Studs For Dexter Trailer Hub and Drum 42656
- Video: Redline Tires and Wheels 7-122 Review
- Q&A: Can Wheel Studs on Brake Hub/Drum Be Replaced
- Q&A: Replacement Wheel Stud 1/2" Diameter x 2" Long
- Q&A: Replacement Drive-In Studs for Hub with 6 on 5-1/2 Inch Bolt Pattern
- Q&A: Corrosion Resistant Version of Wheel Stud # 7-122
- Q&A: Replacement Wheel Stud for Dexter 8-213-5UC1-EZ 5200 lb Idler Hub
- Shop: Dexter Trailer Hub and Drum Assembly for 5,200-lb Axles - 12" Diameter - 6 on 5-1/2
- Shop: Trailer Hub Wheel Stud, Drive-In, 1/2" x 2.24" - Qty 1
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb E-Z Lube Axles - 12" - 6 on 5-1/2
- Shop: Dexter Trailer Idler Hub Assembly for 5,200-lb E-Z Lube Axles - 6 on 5-1/2
- Shop: Linxup GPS Tracking Device - 3-3/4" Long x 2" Wide x 1" Tall
- Search Results: dexter wheel studs
- Search Results: lug
- Search Results: wheel stud
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Q&A: Stud Installation on Dexter Axle Trailer Hub Assembly # AKIHUB-440-2-1K
- Search Results: 25580
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Article: Most Popular Wheel Bearings
- Search Results: 10~36
- Video: Choosing the Right Trailer Wiring
- Shop: Brake Controller
- Article: Trailer Tire Sizing
- Search Results: fender
- Video: Choosing the Right Brake Controller
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)