Can Wheel Studs on Brake Hub/Drum Be Replaced
Question:
I stripped one of the wheel studs pretty good putting on new trailer tires. Am I able to replace just a stud. Or do I need to replace the whole drum?
asked by: Andy O
Expert Reply:
You should be able to replace the wheel stud, but you'll need to drive the stripped stud out and get the measurements shown in the provided diagram in order to locate the correct replacement. You'll need a drift punch that is smaller in diameter than the wheel stud and a heavy hammer.
If you have a hub/drum for a 3500 lb axle (like the # AKHD-655-35-EZ-K you'd looked at), the replacement wheel stud would be # 7-122.
If you have a different hub, provide me with the measurements shown in the diagram, and we'll help identify the correct replacement.
Products Referenced in This Question
Trailer Hub Wheel Stud - Drive In - 1/2" Diameter x 2" Long - Qty 1
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Studs
- 1/2 Inch Diameter
- Drive-In Stud
- 2 Inch Long
- Redline
more information >
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 6 on 5-1/2 - Pre-Greased
- Shop: Trailer Hub Wheel Stud - Drive In - 1/2" Diameter x 2" Long - Qty 1
- Q&A: Wheel Stud Diameter for 3,500 lb Trailer Hub/Drums
- Video: Trailer Axle Long U-Bolt Mounting Kit Review
- Video: Review of Dexter Axle Trailer Axles - Leaf Spring Suspension - 8327860
- Video: Review of TruRyde Trailer Spindles - Standard Spindle - TRU97FR
- Q&A: Trailer Bearing Availability with Inner Diameter of .75 inch and 1.25 inch
- Q&A: Hub Recommendation for Spindle with Diameters of .75 and 1.25 inches
- Q&A: Can Heavier Rated Leaf Springs than Needed be Used on a Trailer
- Shop: Replacement Trailer Hub Bearing - LM67048
- Shop: Drive-in Wheel Bolt for Trailer Wheel Hubs - 9/16" Diameter x 2-5/16" Long - Qty 1
- Shop: Dexter Heavy Duty Suspension Upgrade Kit for Single Axle Trailers - Double Eye Springs
- Search Results: trailer wheel studs
- Q&A: Replacement 3500 lb Hub/Drum for TruRyde RVD-H-65535 10 Inch Trailer Brake Drum
- Q&A: How Much Clearance is Needed to Account for Suspension Travel on a Trailer
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 6 on 5-1/2
- Q&A: How to Measure Trailer Leaf Spring to Find Correct Replacement
- Video: Redline Tires and Wheels 7-122 Review
- Video: Review of LubriMatic Lubricants Sealants Adhesives - Poly HP-2 Grease - L11465
- Search Results: wheel studs
- Search Results: wheel stud
- Search Results: aluminum hitch cargo carrier
- Search Results: hitch bike racks
- Search Results: aluminum hitch rack
- Video: K-Source Universal Clip On Towing Mirrors Installation - 2022 Toyota Tundra
- Shop: Towing Mirrors
- Video: etrailer Trailer Hub and Drum Assembly Review and Installation AKHD-655-35-EZ-K
- Search Results: trailer hub studs
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide