SumoSprings Helper Springs For a 2018 Tiffin Open Road Allegro Motorhome Ford F53 GVWR 26,000lbs

Question

Question:

I know it probably been asked... Can you provide SUMO spring front and rear PNs for a 2018 Tiffin Open Road. 36UA model. Ford 26k chassis. Thanks,

asked by: JASON M

0

Expert Reply:

The Front SumoSprings Rebel Custom Helper Springs # SSF-173-40-2 are the correct Springs for your 2018 Tiffin Open Road Alegro 36UA on the Ford F53 GVWR 26,000lb chassis. These have a 3,000lb capacity to assist your suspension in supporting the additional weight on your chassis and will help to reduce road shock and body roll.

The Rear SumoSprings Maxim Custom Helper Springs # SSR-183-54-1 are your correct rear springs for your Tiffin. They have a 7,000lb weight capacity for supporting the extra weight of the motorhome and reducing road shock and body roll.

expert reply by: Bud M

0

Answer 1

The recommended SumoSprings helper springs for your 2019 Fleetwood Bounder motorhome built on a Ford F-53 chassis are the SumoSprings Maxim Custom Helper Springs #SSR-187-54-1. These rear axle springs are the only SumoSprings that fit a Fleetwood…

view full answer...

Answer 2

Let me see what I can figure out for you, I have the solution linked below: **SumoSprings Rebel Custom Helper Springs - 2 Piece - Front Axle #SSF-173-40-2. There was a generation change in the F-53 chassis, Ford changed the motor to the 7.3L V8.…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

Hi there David; we do have truck camper jacks that can work for your F-250 with a lift and large tires. What you can use are camper jacks from Brophy, which have a 17" to 67" lift range, which is the highest possible lift height. There are…

view full answer...

Answer 5

It appears that your u-bolt plate on your 2021 Grand Design Reflection 31MB, will work with the SumoSprings Trailer Helper Springs #SS26MV. The plate itself including the bends does not appear to be larger than 3/4" nor does the width appear to…

view full answer...

Answer 6

The bolt that is attached to the top of the SumoSprings Rebel Custom Helper Springs - 2 Piece #SSF-173-40-2 is a 3/8" x 3/4" flange bolt. This bolt is not offered as a separate part but you could easily go down to your local hardware store…

view full answer...

Answer 7

You're already on the right track with everything you looked at. Your 2018 Thor ACE 30.3 has a GVWR of 18,000 lbs so I recommend the following: -Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets for Class A Motorhomes #RM33RR…

view full answer...

Answer 8

No, the Replacement Standard Dual Rack Repair Kit for Lippert RV In-Wall Slide-Outs #LC26VR includes the slide racks and the following pieces of hardware: 2 Rack-end pugs 2 Rivets 2 Rollers 2 Snap rings 6 Wear plugs I've attahced a photo of the…

view full answer...

Answer 9

There is a suspension enhancement option for your 2021 Entegra Vision XL built on a Ford F-53 chassis, but I verified with the manufacturer that the steering stabilizer only fits if you have at least a 24,000 lb GVWR. You're not out of luck…

view full answer...

Answer 10

When It comes to installing Suspension Enhancement on your 2019 Tiffin Open Road Allegro, The SumoSprings Rebel Custom Helper Springs - 2 Piece - Front Axle #SSF-170-40-2 would work good. The SumoSprings have a 3,000 capacity and will upgrade your…

view full answer...

Answer 11

The SumoSprings Maxim Custom Helper Springs - Rear Axle #SSR-183-54-1 can be installed without removing the wheels on your 2014 Tiffin Allegro Open Road 36LA, but it will be more complicated because of restriction working room. I've attached a…

view full answer...

Answer 12

The best adjustable height ladder rack for your 2023 Ford Maverick that is compatible with a tonneau cover is the Yakima OverHaul HD part #Y01151-57555. This comes with adapters designed to fit the T-slots of the RetraxONE XR part #RTX83QR which is a…

view full answer...