Hardware Parts for Repair Kit for Lippert RV In-Wall Slide-Outs

Question

Question:

Does this kit come with extra small angle iron to hold the ends while it is being installed?

asked by: Mike H

0

Expert Reply:

No, the Replacement Standard Dual Rack Repair Kit for Lippert RV In-Wall Slide-Outs # LC26VR includes the slide racks and the following pieces of hardware:

2 Rack-end pugs
2 Rivets
2 Rollers
2 Snap rings
6 Wear plugs

I've attahced a photo of the hardware and a review video of the whole kit for you to check out.

expert reply by: Jon G

0

Standard Dual Rack Repair Kit Hardware Parts
(click to enlarge)

Answer 1

The bolt that is attached to the top of the SumoSprings Rebel Custom Helper Springs - 2 Piece #SSF-173-40-2 is a 3/8" x 3/4" flange bolt. This bolt is not offered as a separate part but you could easily go down to your local hardware store…

view full answer...

Answer 2

The piece you're referring to in the #LC26VR kit is called a "shoe". This part is plastic with foam pads on each end that helps cushion the motor bracket as it slides back and forth to either end of the track.

view full answer...

Answer 3

In regards to the Replacement Standard Dual Rack Repair Kit for Lippert RV In-Wall Slide-Outs, the float side is on the right part #LC26VR and the fixed is on the left part #LC84FR.

view full answer...

Answer 4

Yes, exactly. The Replacement Standard Dual Rack Repair Kit for Lippert RV In-Wall Slide-Outs, #LC26VR that you linked to will need to be cut down on the un-notched end to the length needed for your application.

view full answer...

Answer 5

The Fixed Dual Rack Repair Kit #LC84FR goes on the left side of the slide as you look at the slide out from the outside of the camper. So on the drivers side it will be the front of the slide. The Floating Dual Rack Repair Kit #LC26VR is going to be…

view full answer...

Answer 6

The blocks you're referring to in the #LC26VR kit are called "Flat back rack plugs" and are used to close the holes up on either end of the track. This just prevents water, bugs, etc. from getting into the opening of the track and…

view full answer...

Answer 7

Hey Dave, Air Springs and SumoSprings both fall under the same category with the main goal to help prevent sag but offer different styles of solutions. Air springs offer the adjustability to help level your ride back out, which can make a huge…

view full answer...

Answer 8

No, the Replacement Standard Dual Rack Repair Kit for Lippert RV In-Wall Slide-Outs #LC26VR includes the slide racks and the following pieces of hardware: 2 Rack-end pugs 2 Rivets 2 Rollers 2 Snap rings 6 Wear plugs I've attahced a photo of the…

view full answer...

Hardware Parts for Repair Kit for Lippert RV In-Wall Slide-Outs

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching