Trailer Hitch Installation for 2018 Alfa Romeo Stelvio

Question

Question:

hello it looks little bit hard to install a hitch on my Alfa Romeo Stelvio does it is possible to find one bike carrier with Stiker or something like ? SeaSucker Komodo Trunk Bike Rack - thank a lot for your help

asked by: Max D

0

Expert Reply:

The Draw-Tite # 76199 Class III hitch which is a fit for your 2018 Alfa Romeo Stelvio does have a pretty involved installation which would require that the rear bumper cover and bumper beam be removed. The hitch would take the place of the bumper beam which won't affect the crashworthiness of the vehicle.

Because of the complexity of the installation, I'll typically recommend that folks who aren't comfortable attempting an install of this sort have an auto body shop complete the install. An auto body shop would be well versed in how to quickly and efficiently remove body panels like the bumper cover without damaging it.

The Curt Class III hitch, part # C13391 is a bit easier to install, but it would be more visible, as the hitch crossbar would not be concealed behind the bumper like that of the Draw-Tite # 76199.

If you'd prefer a roof mounted option, the SeaSucker Komodo would work perfectly, according to SeaSucker, it'll work on any vehicle and doesn't have to be used on the rear hatch or trunk, it can also easily be mounted to the vehicle roof, which would work best on your Stelvio. The Komodo is available in a variety of colors:

• Black, part # 298-BK1910-BK
• Aqua Blue, part # 298-BK1910-AB
• Silver, part # 298-BK1910-SV
• Gold, part # 298-BK1910-GO

The Komodo uses 4 vacuum cups (suction cups) that are capable of holding 210 lbs each, so it'll handle a bike on the vehicle roof just fine.

I've provided links to the installation instructions for the hitches mentioned above, as well as to a demonstration video for the SeaSucker Komodo bike rack.

expert reply by: Mike L

0

Answer 1

Out of the three hitches we have for your 2018 Alfa Romeo Stelvio the Curt Trailer Hitch Receiver item #C13391 you referenced weighs the least at 35 lbs. This hitch is custom fit and bolts directly to your Alfa Romeo with included hardware. This…

view full answer...

Answer 2

I recommend using the etrailer Hitch Receiver Lock #e98881 with the Curt Trailer Hitch Receiver #C13391 on your 2021 Alfa Romeo Stelvio. This pin has a extended span for larger receivers but with the receiver on the Alfa I feel this will make it a…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Installing the Draw-Tite #76199 Class III hitch on your 2021 Alfa Romeo Stelvio will prevent the liftgate sensors under the center of the bumper from picking up movement, but if you wave your foot a few inches to one side or the other of the hitch…

view full answer...

Answer 6

The ideal height will actually have to do with how tall the coupler of the trailer is from the ground. The Draw-Tite #76020 will sit at 13 1/2 inches from the ground to the top of the hitch when installed on a 2016 Mazda CX-9. From what I could find…

view full answer...

Answer 7

The 2020 Alfa Romeo Stelvio (All Models) would be best matched with the Stealth Hitches Hidden Rack Receiver part #SH54FR for bike racks and cargo carriers or the Stealth Hitches Hidden Trailer Hitch Receiver with Towing Kit part #SH54FRT for trailer…

view full answer...

Answer 8

I spoke to Stealth Hitches about installing #SH54FR on your 2021 Alfa Romeo Stelvio, and it does require trimming as well. I included a picture of what will need to be trimmed as well. Though the receiver portion of the #SH54FR is detachable, these…

view full answer...

Answer 9

The only thing recommended outside of the normal installation process for the #RED24FR for a vehicle with a CAN bus system is the 30-Amp Circuit Breaker Kit for Redarc Tow-Pro Elite, Classic, and Liberty Trailer Brake Controllers #331-CBK30-EB. This…

view full answer...

Answer 10

I attached a picture of the EcoHitch Stealth #306-X7395 you referenced for you to check out. You can see that the lower hitch opening of it is removable like you are curious about.

view full answer...

Trailer Hitch Installation for 2018 Alfa Romeo Stelvio

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching