Recommended Camper Tie-Downs For A 2000 Ford F-350 Dually 8 Bed

Question

Question:

Which Torklift Camper tie downs fit 2000 F350 dually 8ft bed?

asked by: Reies T

0

Expert Reply:

For your 2000 Ford F-350 Dually 8ft bed - with board or step underneath truck bed and with a factory installed hitch the correct fitting camper tie-downs are the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLF4006 and the TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLF3001.

For turnbuckles I recommend the TorkLift Locking FastGun Turnbuckles for Frame-Mounted Tie-Downs - Stainless Steel - Black - Qty 4 Item # TLS9529-2-LK. The quick-release levers on these turnbuckles make it fast and easy to secure your truck bed camper to your vehicle.

expert reply by: Kevin C

0

Answer 1

Thank you for providing a photo of your hitch cross tube's open ends. Yes, this is where the TorkLift Camper Tie-Down #TLF3001 will install. The linked installation instructions show the process with clear color photos to detail the install…

view full answer...

Answer 2

Yes the TorkLift Custom Frame-Mounted Camper Tie-Downs part #TLF3001 will work on your 2000 Ford F-350 with the factory hitch. They are designed to be very easily installed and do an excellent job of keeping your camper secure. The rear most portion…

view full answer...

Answer 3

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

If you are considering Timbrens like the #TDR1500DQ and the SumoSprings like the #SSR-307-47 for your 2022 Ram 1500 4x4, I recommend the SumoSprings #SSR-307-47. The SumoSprings will offer the same quality as the Timbrens in terms of suspension…

view full answer...

Answer 6

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Answer 7

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 8

The best air bag kit for your 2022 Ford F-350 that has a single rear wheel axle is the part #F95FV which has the 5,000 lb capacity you are wanting. Firestone bags are superior Air Lift bags. The ply rating of the rubber is higher, the attachment to…

view full answer...

Answer 9

You'll need to do some slight measuring to ensure the fit of the Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs #F95FV on your 4WD 2022 Ford F-350 FX4 dually. Just measure from the top of the rear axle to the top of the jounce…

view full answer...

Answer 10

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 11

Since you are pulling a trailer that weighs around 8,500 lbs. you would just want to stick with the Firestone Ride-Rite Air Helper Springs #F35FV (5,000 lb.). You really only need to spend more for the Firestone Ride-Rite Red Label Extreme Duty Air…

view full answer...

Answer 12

Hey Robert, sorry it can be a bit confusing navigating all those facets for the camper tie downs, but I did go ahead and find those tie downs you were looking for. For the front, you'll want the TorkLift Camper Tie-Downs #TL87CR (TorkLift P/N…

view full answer...