TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
(1484 reviews)
Price: $387.71
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (1484)
- Q & A (0)
- Photos
TorkLift Camper Tie-Downs
- Rear Tie-Downs
- TorkLift
- Frame-Mounted
- Custom Fit
- Powder Coated Steel
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Features:
- Creates attachment points for securing your camper to your truck bed
- Pairs with front tie-downs (sold separately)
- Requires turnbuckles (sold separately) to attach camper to tie-downs
- Ensures excellent handling by distributing the weight evenly and lowering the center of gravity
- Avoids a top-heavy setup that would be vulnerable to strong winds and sway
- Remains virtually invisible beneath your vehicle
- Remove the arms and you'll hardly know the brackets are there
- Adjusts for simple, secure connection to camper
- Extend arms out from truck body to clear bowed sidewalls and fenders
- Choose between 2 anchor holes to get the best angle for a secure hold
- Made of black powder coated steel to resist corrosion
- Mounts tight to your vehicle's frame - minimal loss of ground clearance
- Uses pre-existing holes in the frame - little to no drilling required
- Includes 2 rear tie-downs and installation hardware
- Made in the USA
- Lifetime warranty
A Safe Ride is a Comfortable Ride
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity will sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Don't Ruin Your Truck's Looks
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush with the underside of the vehicle. Remove the arms from the brackets when you're not hauling your camper, and the brackets will be barely visible.
Custom Fit, No-Drill Installation
Completely custom to your vehicle, the tie-downs attach to exisiting holes in your frame so that there's little to no drilling and no need for any modifications. Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Securing Your Camper
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
F3001 Tork Lift Truck Camper Tie Down - Rear Frame Mount - Custom Fit
Replaces 39146
Item # TLF3001
This Product Fits The Following Vehicles
- 2000 - 2003 Ford F-150 6-1/2 Foot Bed - without board or step underneath truck bed and with a factory installed hitch
- 2000 - 2003 Ford F-150 8 Foot Bed - without board or step underneath truck bed and with a factory installed hitch
- 1997 - 1999 Ford F-150 and F-250 Light Duty 6-1/2 Foot Bed - without board or step underneath truck bed and with a factory installed hitch
- 1997 - 1999 Ford F-150 and F-250 Light Duty 8 Foot Bed - without board or step underneath truck bed and with a factory installed hitch
- 2004 - 2004 Ford F-150 Heritage Series 6-1/2 Foot Bed - without board or step underneath truck bed and with a factory installed hitch
- 2004 - 2004 Ford F-150 Heritage Series 8 Foot Bed - without board or step underneath truck bed and with a factory installed hitch
- 1999 - 2004 Ford F-250 Super Duty 6-3/4 Foot Bed - with board or step underneath truck bed and with a factory installed hitch
- 1999 - 2004 Ford F-250 Super Duty 6-3/4 Foot Bed - without board or step underneath truck bed and with a factory installed hitch
- 1999 - 2004 Ford F-250 Super Duty 8 Foot Bed - with board or step underneath truck bed and with a factory installed hitch
- 1999 - 2004 Ford F-250 Super Duty 8 Foot Bed - without board or step underneath truck bed and with a factory installed hitch
- 1999 - 2004 Ford F-350 Super Duty 6-3/4 Foot Bed - with board or step underneath truck bed and with a factory installed hitch
- 1999 - 2004 Ford F-350 Super Duty 6-3/4 Foot Bed - without board or step underneath truck bed and with a factory installed hitch
- 1999 - 2004 Ford F-350 Super Duty 8 Foot Bed - with board or step underneath truck bed and with a factory installed hitch
- 1999 - 2004 Ford F-350 Super Duty 8 Foot Bed - without board or step underneath truck bed and with a factory installed hitch
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Alternate product found
- Product did not meet expectations
Customer Reviews
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear - TLF3001
Average Customer Rating: 4.7 out of 5 stars (1483 Customer Reviews)
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.by: Gilbert C04/11/2024
Frame mounted tie downs that attach to the reciever. No holes to drill!
by: Scott 04/26/2024
The parts arrived on time and the installation went super easy! All in all it took about 15 minutes!
by: Jonathan L.S.10/12/2017
Very durable and good looking product. It is a great investment for someone like me who carry heavy camper on the bed of my pick-up truck. Would highly recommend it.
by: Jim R. 04/23/2014
This product is made to fit several versions the Ford F250- mine is a 2002 model. This attached to the factory installed hitch just as it said it would. The only derivation came when I went to attach the bracket which locks over the bolt and existing crossbar. The angle of the bolt did not match the angle of the fitting, so it does not quite fit as snug as I would like. Nonetheless, it holds well so far, being that the acorn nut tightens down and locks things in place. I hauled a 1 ton slide-in camper 60 miles without any hassle. This product does what Etrailer said it would, and along with its counterparts in the front of my truck box, - also an etrailer purchase- I have no worries about summer camping season! I am a satisfied customer.
by: Robert 10/06/2021
Great product, just what I needed and fair price. This web site is easy to navigate and ordering is a breeze.
Robert
10/7/2022
Still works as advertised and just the right product for use.
by: Jim B05/21/2014
The Torklift True Frame Mounted Camper Tie Downs I purchased for my 2004 F350 with single rear wheels seem to be constructed out of sufficient steel gauge and grade of steel to adequately hold a camper in the truck bed. This method of securing a camper to the bed of the pick up is probably the most secure method available because it does not rely on the strength and integrity of the bed walls. My experience with this Ford is that the pickup bed is not designed for certain weight bearing applications and such as supporting heavy overhead racks on rough roads. They are also probably not designed to handle the forces that may occur on rough roads, during an emergency maneuver, or during even a minor collision with a bed mount system. The same is probably true for Dodge and Chevy.
by: Jason11/11/2018
Perfect fit on 2001 F350 crew cab with factory tow hitch. Super easy to install and work perfectly. Got front mounts to and also work perfectly. Definitely worth the money. Thanks TorkLift and Etrailer for another great bolt on product!!!
I'm a happy camper!!
by: Christopher08/23/2020
Speedy service, was delivered when they said they would be.
by: Bob06/29/2020
Products came before promised and etrailer matched lower price I could have gotten [online] for the same products.
by: George 01/22/2023
Once again Adam directed me the the correct product. Arrived quicker than I expected and all was good.
by: Robin Robb03/25/2021
Your salesman (Adam) was a 5 star your product a 4 had to customize back tie down Also overly expensive bills for 4 hunks of metal Give Adam a raise (very professional)
by: TJ05/15/2017
Driver's side front tie-down was tough to install, my '99 Ford Super Duty wouldn't allow the placement of the 1" backer plate on the inside of the frame due to other OEM things installed in that channel of the frame area. I was able to get the bolt and star washer in. Other than that the whole system was straight forward and good quality!
by: Clint 01/28/2023
Installation took less than 10 minutes and were ready for use.
by: BluntHeadTrauma11/16/2018
TLF3001 fit my 1999 F250 SD with frame mount receiver hitch. Solid built with steel. Best way to secure your camper to the frame.
by: Tom F08/16/2019
all questions i asked were answered very well.the camper torklift tie downs were all as described and no holes had to be drilled,easy to install. very helpful staff.
by: Kevin 09/14/2019
Tayler was very helpful with finding the right part and filling my order. shipping was fast, the parts are well made and installation was easy. over all it was a great shopping experience..
Kevin B.
9/15/2020
they work great, easy to install and securely hold my camper
by: Judd11/17/2021
Shipped the wrong product. Very disappo inting
Sierra K.
11/26/2021
Customer service will reach out to you.
by: Timothy 05/12/2020
I've ordered thru e-trailer several times and the customer service has always been excellent. I will continue using e-trailer in the future as I know they won't disappoint me.
by: Harry A03/12/2023
The help I got to get the right item was outstanding. Will update when I install.
by: Martin 12/02/2022
Used for a 2022 Palomino/Real-Lite on a 2002 Ford 150 SuperCrew and they work perfectly, I'm very pleased with my purchase
by: Larry J04/02/2020
Exactly what we wanted. Installation was pretty easy for me, a 70's year old, and my wife provided her skillful assistance. We got about eight thousand miles on our damper last year.
by: Don11/04/2017
The product arrived a day earlier than predicted and with all the necessary hardware. The install took less than 15 minutes and the parts fit right as they were suppose to. Great product and great service will be ordering the front ones soon.
by: Bradley 07/15/2020
Fairly easy installation and solid as a rock. Great product for this application.
I would buy it again.
by: David06/28/2018
Fantastic product. Love 'em!
by: David 09/30/2020
Again the quality of the product is second to none. And installation was a breeze.
25
1482
Show More Reviews
See what our Experts say about this TorkLift Camper Tie-Downs
- What Size are the Inner and Outer Tubes and Wall Thickness of TorkLift Camper Tie DownsThe TorkLift camper tie downs you referenced, # TLF2011 and # TLF3001 will have an outer assembly and an inner assembly. Tie down # TLF3001A will too but it has aluminum components. The measurements will be the same for all of these. I pulled # TLF2011 to take the measurements. The inner tube is smaller, 1-1/2 inches square with a wall thickness of 3/16 of an inch. The part of the inner tube that you tie the camper off to is 1/4 inch thick. The outer tube is larger at 2 inches square...
view full answer... - Replacement TorkLift Talon Rear Camper Tie Downs for a 2013 Ford F-350TorkLift doesn't offer their tie downs in singles so you'd actually have to purchase both and just replace the one with TorkLift Talon Camper Tie-Downs # TLF3001.
view full answer... - How Do the Rear Camper Tie Downs for a 2004 F-250 Super Duty Install in the Trailer HitchThe 2-1/2 inch opening is not going to be a problem. The rear tie downs, # TLF3001, come with a sleeve that fits around the outer tube and inside of the open ends of the hitch on the truck. With the sleeve on the width of the outer tube becomes 2-1/2 inches. I pulled # TLF3001 to confirm this. There would be minimal space between the outer tube sleeve and the inner part of the hitch tube. On the bracket from the center of that bolt that faces rearward to the end of the tube is 6 inches....
view full answer... - Does TorkLift Camper Tie-Down # TLF3001 Install in the Open Ends of the Hitch Crosstube Thank you for providing a photo of your hitch cross tube's open ends. Yes, this is where the TorkLift Camper Tie-Down # TLF3001 will install. The linked installation instructions show the process with clear color photos to detail the install steps.
view full answer...
- Would TLF3001 Fit my 2000 Ford F-350 with the Factory HitchYes the TorkLift Custom Frame-Mounted Camper Tie-Downs part # TLF3001 will work on your 2000 Ford F-350 with the factory hitch. They are designed to be very easily installed and do an excellent job of keeping your camper secure. The rear most portion of the hitch where you say it is rounded in slightly may pose a slight interference issue but if it does just bend or tap it out just enough for the tie downs to slide in.
view full answer... - Which Torklift Tie Downs Fit 1999 Ford F-250 Long BedFor your 1999 Ford F-250 long bed with a factory hitch the Torklift camper tie downs you need are the part numbers # TLF4006 and # TLF3001 and you'd be set.
view full answer... - Recommended TorkLift Custom Camper Tie-Downs for 2001 Ford F-350We have a nice selection of TorkLift Custom Frame-Mounted Camper Tie-Downs designed to fit your 2001 Ford-350, however the particular front tie-downs you need will depend on your exact model and what it is equipped with. For example, if your F-350 with the 8 foot bed features a board or step underneath the truck bed and the factory trailer hitch, you will need the Camper Tie-Downs # TLF4006 for the front. If you find you also need the rear tie-downs, you will use part # TLF3001. I have...
view full answer... - Camper Tie Down Recommendation for Short Bed Ford F-250 with Factory HitchAs long as your 1999 Ford F-250 has a 6-1/2 foot bed, doesn't have a board or step under the truck bed, and has a factory installed trailer hitch the Torklift Tie Downs part # TLF2002 would fit and work well for front tie-downs. For a matching set of rear tie-downs you would want the part # TLF3001.
view full answer... - Which Torklift Camper Tie Downs Fit 2000 Ford F-250 Short BedThe correct Torklift Camper Tie Downs you need for your 2000 Ford F-250 short bed without factory steps and a factory hitch is actually the part # TLF2007 and # TLF3001.
view full answer... - Torklift Camper Tie Downs that Fit 1999 Ford F-250 Long Bed with Running Boards and Factory HitchThe correct Torklift Tie Downs you'd need for your 1999 Ford F-250 long bed, with running boards and a factory hitch is the part # TLF4006 and # TLF3001.
view full answer... - Rear Torklift Truck Bed Camper Tie Downs for 2001 Ford F350 With Factory HitchAlthough the # TLT3303 tie-downs aren't a fit for your 2001 Ford F350, we do have a rear tie down fit that's compatible with a factory hitch. For a steel tie-down, use # TLF3001 or # TLF3001A for an aluminum/stainless tie down.
view full answer... - Stake Pocket Mounted Camper Tie Down on 2002 Ford F-250 According to Brophy the Stake Pocket Mounted Camper Tie Downs # TDSF will fit most all pickup trucks up to 2010 model years. As there is no exact fitment guide I recommend verifying the measurements with your 2002 Ford F-250 to ensure proper fit. The stake length is 5-1/2" x 1-7/8" wide and 1-5/8" deep. It will extend out 3" from the stake pocket before flaring out to ensure that your fenders are not to wide. This product is also not recommended to be used if your camper is more than...
view full answer... - TorkLift Camper Tie-Down Compatibility With A 2015 Ford F-250 Super Duty The TorkLift Talon Custom Frame-Mounted Camper Tie-Downs # TLF3001A was designed for Fords up to 2004. It has different bends to compensate for components under the truck. It will work in place of the TorkLift Custom Frame mounted Camper Tie-Downs # TLF3006 but will look a little wonky because it will be at a different angle and will cut out some clearance on each side.
view full answer... - Can I Use Tie Down Anchors From a Long Bed 2000 F-250 on a Short Bed 2000 F-250It would depend on whether or not there is a running board or step that goes underneath the truck bed, but even assuming that their camper tie downs are off a F-250/F-350 without the board or step and using a factory hitch, there will be different components for either the front or the back. The 2001 Ford F-250 and F-350 both use the same rear # TLF3001 tie down, but the front tie down you would need is the # TLF2007. The brackets and how they connect to the truck will be different in...
view full answer... - Compatibility of TorkLift Camper Tie-Downs Since your F-250's hitch was installed after it left the factory it could potentially be either a factory hitch or an aftermarket hitch. There should be a safety sticker on the hitch that indicates its capacities and also its manufacturer. If there is no such sticker on your hitch, nor any identification for brand (Curt, Draw-Tite, Hidden Hitch) nor a part number, then chances are its the OEM version. If you have a non-Torklift aftermarket hitch the tie downs you can use are part # TLF2011...
view full answer... - Torklift Tie Downs and Happijac Turnbuckles for 1999 Ford F-350The Torklift Camper Tie Downs part # TLF2011 and # TLF3001 are a confirmed fit for your 1999 Ford F-350 long bed without boards and a factory hitch. The HappiJac turnbuckles part # LC182895 would work great with these as well.
view full answer... - Torklift Talon Tie Downs for 2013 Ford F-350 with OEM HitchThe front tie down that you need is the part # TLF2012A and the rear is the part # TLF3001A which is essentially the same as the TLF3006A but the part number did changed.
view full answer... - Will the TorkLift Talon Camper Tie-Downs Fit 2016 Ford F-250 with 8 Foot Bed and Factory HitchYes, the TorkLift Talon Custom Frame-Mounted Camper Tie-Downs # TLF2016A (for the front) and # TLF3001A (for the rear) are confirmed to fit the 2016 Ford F-250 Super Duty, 8 foot bed, with factory hitch installed, as long as there is no board or step underneath the truck bed. The factory receiver hitch needs to have an open-ended crosstube to be compatible with these tie-downs. The installation instructions for each set of camper tie-downs is linked to this page for you.
view full answer... - Camper Tie Down Recommendation for 2016 Ford F-250 Crew Cab Short BedFor your 2016 Ford F-250 with a short bed, factory hitch, factory steps, and crew cab the Torklift tie downs part # TLF2012A and # TLF3001A are both a confirmed fit. The price for both is listed below. No drilling is required either.
view full answer... - Are Inserts Sold For TorkLift Frame Mounted Tie Downs on 2001 Ford F-350Inserts are not sold individually so you'd need the whole tie-down kit. For your 2001 Ford F-350 the rear tie-down is the TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLF3001. The front will depend on your bed length, and so long as you do not have running boards that go underneath the truck bed, the right fit is either: - 6-3/4' Bed: TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLF2007 - 8' Bed: TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLF2011 For...
view full answer... - What Do I Need To Mount A Camper On My 2001 Ford F-250 Super Duty Short BedIf your truck comes with a factory hitch without a running board, you will need these two items: TorkLift Custom Frame-Mounted Camper Tie-Downs - Front, part # TLF2007 TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear, part # TLF3001 If your truck comes with a factory hitch with running boards under the bed, you will need these items: TorkLift Custom Frame-Mounted Camper Tie-Downs - Front, part # TLF4007 TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear, part # TLF3001 The second...
view full answer... - Camper Tie Down Recommendation For 2009 F-350 Single CabIf you have an 8' truck bed I recommend # TLF2011 and # TLF3004. If you have a 6-3/4' truck bed I recommend # TLF2012A and # TLF3001A. Note: These tie-downs are made for a factory installed hitch.
view full answer... - Camper Tie-Down Recommendation for 1999 Ford F-250 with 8 Ft BedIn order to determine which camper tie downs will fit your F-250, I will need to know what type of hitch is installed on your truck and whether or not there is a board or step underneath the truck bed. I have included the link to all of the camper tie-downs that are available for the 1999 F-250. From there you can choose your vehicle style and your options will be displayed. If your 1999 Ford F-250 is equipped with a factory installed hitch and does not have a board or step underneath...
view full answer... - What TorkLift Tie Downs Are Needed For a 2007 Ford F-250 Super Duty Pickup? The correct TorkLift Camper Tie-Downs for your 2007 Ford F-250 Super Duty is going to depend on your exact truck. The most common styles are either a 6-1/2' bed without a step under bed and factory receiver or 8' bed without a step under bed and factory receiver. If you have a different configuration please let me know so I can find you the correct parts. The 6-1/2' bed option will use the Front # TLF2007A and Rear # TLF3001A mounts. If you have an 8' bed you will need the Front # TLF2011A...
view full answer...
Do you have a question about this Camper Tie-Down?
Info for this part was:
Written by:
Lindsey S
Expert Research:
Adam R
Video Edited:
Dustin K
Updated by:
Wilson B
Updated by:
Isabelle B
Updated by:
Amanda K
Installed by:
David F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jim R.
4/24/2015
Ive put over a thousand miles on the truck and camper last season. My etrailer purchase of the torklift product continues to be a reliable system of box-camper stability.