Recommended Hitch for 2021 Nissan Rouge That Works With Hands Free Liftgate

Question

Question:

Im looking for a hitch, for my Nissan Rogue 2021, that will maintain the usage of power lift gate sensor.

asked by: David T

0

Expert Reply:

The Draw-Tite Max-Frame Trailer Hitch Receiver part # DT85MR is a great option for a 2021 Nissan Rouge and what I recommend using. It should still allow for the hands free liftgate to be operational but you will need to now place your foot on either side of the receiver tube.

expert reply by: Conner L

0

Answer 1

Once the Curt #C13204 is installed, the sensors located in the center of the under bumper area will be obscured by the square hitch receiver tube. However, there are sensors under the right and left side of the bumper and those will function just…

view full answer...

Answer 2

The shank on the RockyMounts BackStage, part #RKY10002 has the following dimensions from the center of the hitch pin hole: To the end of the shank: 2-1/2 inches To the nearest part of the carrier when folded down: 9-1/2 inches To the nearest part…

view full answer...

Answer 3

When comparing the Curt #C24HR, etrailer #e93ZR, and Draw-Tite #DT85MR there are very few differences. All three hitches have a 2" receiver and the same maximum gross towing weight of 3,500 lbs and tongue weight of 525 lbs. The Curt and etrailer…

view full answer...

Answer 4

The Draw-Tite #DT85MR and etrailer.com #e93ZR Class III hitches will be evenly matched in weight capacities for your 2021 Nissan Rogue, so we can disregard the capacities for this comparison. Especially since your Rogue can tow, when properly…

view full answer...

Answer 5

For your 2022 Nissan Rogue I would recommend the etrailer hitch part #e93ZR because it has great towing capacities, is only option with a matte finish (others are glossy), and it has the best price. It's made by same company as the Curt #C24HR…

view full answer...

Answer 6

Definitely; so long as your 2021 Nissan Rogue has a 2 inch trailer hitch receiver like the Draw-Tite Max-Frame Trailer Hitch Receiver #DT85MR, the Reese cargo carrier will absolutely work and fit; the correct part is the following: - Reese Cargo…

view full answer...

Answer 7

The Class III hitches we have for your 2022 Nissan Rogue include the Draw-Tite #DT85MR and the Curt #C24HR. I recommend going with the Draw-Tite over the Curt because it sits about 1/2" higher off the ground and the center of the hitch pin hole…

view full answer...

Answer 8

We offer the Draw-Tite #DT85MR, the etrailer brand #e93ZR and the Curt #C24HR Class III hitches, all of which will fit your 2021 Nissan Rogue. All three hitches have identical towing/tongue weight capacities of 3500/525 lbs. The Curt and the etrailer…

view full answer...

Answer 9

We cannot recommend using anti-seize compound when installing the Draw-Tite #DT85MR on your 2021 Nissan Rogue. Though it is rare, bolts can back out when this is used. Especially when used to attach to something that will vibrate and move around a…

view full answer...

Answer 10

The Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" #DT23MR is confirmed to fit all 2021 Nissan Rogue models, including your SV. Unless you specifically want a 1-1/4" hitch, I recommend the #DT85MR Draw-Tite Max-Frame…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Recommended Hitch for 2021 Nissan Rouge That Works With Hands Free Liftgate

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching