Is the Kuat NV 2.0 Compatible with The Curt Hitch Receiver # C13240?

Question

Question:

I’m looking to get a kuat bike rack and a hitch for my 2016 Hyundai Tucson Sport. Will the Kuat NV 2 base 2” BA22B work with the Curt tow hitch receiver C13240? Thanks.

asked by: Rob

0

Expert Reply:

Yes, the Kuat NV 2.0 # BA22B is compatible with the Curt Trailer Hitch Receiver # C13240. With this combination of parts, you will be able to transport two bikes (up to 60 pounds per-bike) on your 2016 Hyundai Tucson.

expert reply by: Bob C

0

Answer 1

There were quite a bit of updates for the new NV which Kuat spent three years working on. One of the biggest differences the new Kuat NV 2.0 part #NV22G has over the previous version is that the wheel cradles can now accommodate tires up to 4.8…

view full answer...

Answer 2

To determine if the Kuat NV 2.0 #NV22G will fit the 2 inch receiver on your Honda Pilot (it does not fit Class I or II 1-1/4 inch receivers), you will need to measure the distance between the receiver hitch pin hole and the furthest rearward point…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 6

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 7

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 8

To replace your NOK AD2527E seal you can use #168233. It has an inner diameter of 1.688 inches and an outer diameter of 2.332 inches. Based on what I could find on the NOK AD2527E the inner diameter is the same and the outer diameter is 2.328 inches.…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 11

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 12

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...