Recommended Trailer Hitch for a 2018 Mercedes-Benz GLA

Question

Question:

Do you sell either of these three models to fit the 2018 GLA250/GLA45? Stealth Hitch models: SHR32016 or SHR32017 or SHR32015. Thank you!

asked by: Kris

0

Expert Reply:

The only two available trailer hitch options we offer for a 2018 Mercedes-Benz GLA at this time is the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75223 and Curt Trailer Hitch Receiver part # C13197. The Curt hitch has a higher weight capacity for more peace of mind while towing so this is what I recommend.

expert reply by: Conner L

0

Answer 1

For mounting a basket on your crossbars you will need to use the Yakima SkinnyWarrior #Y07014 as the Yakima GearWarrior Cargo Carrier #Y37VR can only be mounted to the Yakima EXO SwingBase #Y34VR or TopShelf #Y94VR. The Yakima SkinnyWarrior #Y07014…

view full answer...

Answer 2

The dual hitch receiver with the highest tongue weight capacity is the Malone 2" Dual Purpose Hitch Receiver #MPG544, which has a 400 lb tongue weight capacity. I have added a link to a video review for you to check out. However, it is important…

view full answer...

Answer 3

You are correct that both the Curt #C94WR and Draw-Tite #DT22MR you were looking at for your 2022 Hyundai Tuscon are very similar. Both hitches share the same 525lb tongue weight and 3,500lb trailer weight ratings, both share the same hidden…

view full answer...

Answer 4

That's a good question, because you do need to make sure you have a nice seal with the holes in the trunk of your 2002 Honda Civic Si when you are installing the Curt Trailer Hitch Receiver #C11204. What I recommend is the Loctite RTV 598…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

There is a trailer hitch receiver as well as a 4-way wiring harness that fit your 2022 Jeep Grand Cherokee WL; that said, we don't have any way to reference a VIN so you'll need to confirm if you do have the WL, which is the new model of…

view full answer...