My Trailer Still Causes My Truck to Sag in The Rear When Connected With Weight Distribution Hitch
Question:
2020 f250 XL 4x4 diesel leveled. pulling travel trailer with 698 lbs hitch weight dry weight 5,852 lbs. equalizer distribution hitch. I am sagging in the rear. I wanted to purchase super springs to stop sag. Which super springs would I need? I know there is a lot of different ones with different weight capacities. If I am correct my ride unloaded should not suffer? Thank you,
asked by: Edgar G
Expert Reply:
With the Equal-i-zer Weight Distribution System # EQ37100ET installed on your 2020 Ford F-250 you will not need anything else to remove the sag from the trailer. The head of the Equal-i-zer hitch needs to be adjusted to redistribute more weight on the front of your truck to eliminate the rear sag.
I have included a video that will show how the hitch will redistribute the weight when properly installed as well as a link to the instructions that will show you how to adjust the hitch head pitch to distribute the weight across the F-250.
You can also try the Sway Bracket Jackets # EQ95-01-5150 as these will raise the bars slightly on the brackets and will also give you a quieter ride when maneuvering the trailer.
Products Referenced in This Question
Sway Bracket Jackets for Equal-i-zer Weight Distribution Systems - Qty 2
- Accessories and Parts
- Weight Distribution Hitch
- Sway Control Parts
- Brackets
- Equal-i-zer
- Equal-i-zer
more information >
Product Page this Question was Asked From
Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 10,000 lbs GTW, 1,000 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 800 lbs
- 900 lbs
- Equal-i-zer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Suspension Enhancement
- Shop: Front Mount Hitch
- Shop: Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
- Shop: Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
- Video: SuperSprings Custom Suspension Stabilizer Review
- Shop: SuperSprings Custom Suspension Stabilizer and Sway Control Kit
- Shop: etrailer Tongue Weight Scale for Campers and Utility Trailers - 2,000-lb Capacity
- Q&A: Recommended Rear Suspension Enhancement For 2019 Ford F-250 4WD W/ Truck Bed Camper
- Shop: SuperSprings Custom Suspension Stabilizer and Sway Control Kit
- Shop: Blue Ox SwayPro Weight Distribution w/ Sway Control - Clamp On - Underslung - 20K GTW, 2K TW
- Q&A: Suspension Enhancement for Leveling 2012 Ford F-250 When Pulling Fifth Wheel
- Shop: Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2"
- Video: Review of SuperSprings Vehicle Suspension - Rear Axle Suspension Enhancement - SSA22
- Shop: Trailer Hitch
- Q&A: Correct Timbren Suspension Enhancement For 2021 GMC Sierra 1500 AT4
- Video: SuperSprings Suspension Stabilizer and Sway Control Kit Installation - 2004 Ford F-250
- Video: Front Mount Trailer Hitch Installation - 2006 Ford F-350
- Q&A: Are Spacers Needed for Timbrens on 2021 Chevrolet Silverado 1500 Z71 Trail Boss
- Q&A: Will The Timbren Jounce Springs Fit on a Factory Lifted 2021 GMC Sierra 1500 AT4?
- Video: Reese Strait-Line Weight Distribution System Review RP66082
- Video: Trailer Hitch Installation - 2003 Ford F-250 - Draw-Tite
- Video: Air Lift AirLift 1000 Air Helper Springs Review
- Q&A: Best Option for Reducing Suspension Sag of 2015 Toyota Highlander Towing Trailer
- Q&A: Solution for Suspension Sag on 2016 Toyota Highlander Towing Trailer
- Shop: Fifth Wheel Hitch
- Article: How to Install a Weight Distribution Hitch (With Pictures & Video)
- Shop: Towing Mirrors
- Shop: Brake Controller
- Shop: Gooseneck Hitch
- Search Results: air bags
on Weight Distribution Hitch
