Lift Kit for Jayco 1406 Deluxe with Torflex 1800 lb Axles

Question

Question:

Which kit do I need for a Jayco 1406 deluxe with Torflex 1800lb tandem axle. And a question quicker response would be nice otherwise I can buy the kit elsewhere. It’s been over a week of waiting for you guy to respond and still have no answer!

asked by: Casey G

0

Expert Reply:

Since your Jayco 1406 has 1,800 lb Torflex axles the lift kit you'd need is the # K71-723-01 which will give you a lift of 2-5/8 inches. This is a single axle kit so you'd need to order a quantity of two since you have a tandem axle trailer.

expert reply by: Jameson C

0

Answer 1

My contact at Dexter confirmed that the Torflex Lift Kit #K71-723-01 will work for your 1,500 lb #9 Torflex axle. That being said, based on your serial number 122265412, I was able to confirm you have a top mounted axle. So in order to install the…

view full answer...

Answer 2

Since your 1998 Starcraft has 1,800 lb Torflex axles the lift kit you'd need is the #K71-723-01 which will give you a lift of 2-5/8 inches.

view full answer...

Answer 3

If the distance between the bolt hole centers on your Torflex axle is 7-3/4 inches then you have the #9 Torflex axle and the lift kit part #K71-723-01 would fit and work well. If you have a different dimension there let me know and I'll see what…

view full answer...

Answer 4

The Torflex Lift Kit - Single Axle - 2-5/8" Lift #K71-707-01 is compatible with No. 10 Torflex axles with 2,300 to 4,000 lb capacities. The Torflex Lift Kit - Single Axle - 2-5/8" Lift #K71-723-01 is for No. 9 Torflex axles with a 2,000 lb…

view full answer...

Answer 5

Thank you for the photo of your camper's axle tag. Based on the serial number the correct lift kit is indeed part #K71-723-01 that you referenced, but I did check with Dexter Axle to make sure. This 2-5/8-inch lift kit will work only with…

view full answer...

Answer 6

I attached a picture that shows the dimensions of the Dexter lift kits #K71-723-01.

view full answer...

Answer 7

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 8

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 11

The overall size of the Furrion Over the Range RV Convection Microwave part#FMCM15SS is 29-15/16" wide x 16-3/8" tall x 15" deep and requires a 30" cutout. If this matches the opening and size of the model you have this will be a…

view full answer...

Answer 12

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Lift Kit for Jayco 1406 Deluxe with Torflex 1800 lb Axles

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching