Replacement Male Quick Disconnect For Demco SBS Air Force One Braking System

Question

Question:

Will your RM450720 male nipple fit the Demco quick connector?

asked by: Michael O

0

Expert Reply:

We do have the part you need for the Demco Air Force One brake system, but the Roadmaster won't work; instead, the correct male quick disconnect is the following:

- Replacement Male Quick Disconnect for Demco SBS Air Force One Supplemental Braking System # SM99614

Additionally, if you happen to need the female side, that part is the Replacement Female Quick Disconnect for Demco SBS Air Force One Supplemental Braking System # SM99613.

expert reply by: Kyle S

0

Answer 1

When it comes to replacing the male fitting on the end of the Demco Air Jumper Kit #DM97ZR you will need The Replacement Male Quick Disconnect for Demco SBS Air Force One Supplemental Braking System #SM99614. I attached a review video link below.

view full answer...

Answer 2

Thank you for the details as to what you're looking for with the Demco SBS Air Force One Supplemental Braking System #SM99243. I'll list the parts I believe you were talking about below but if you need any additional parts please let…

view full answer...

Answer 3

The Demco SBS Air Force One Coiled Air Jumper Kit for Freightliner BrakeSync-Equipped Chassis part #DM97ZR is for motorhomes that came with the Air Force One installed at the factory whereas the Replacement Air Jumper for Demco SBS Air Force One…

view full answer...

Answer 4

Actually, you need the Replacement Female Quick Disconnect for SMI Air Force One #SM99613. Installation is fairly straightforward, especially if the base is still intact enough to reuse and you only need to quick-disconnect end. If any of the rest of…

view full answer...

Answer 5

The individual fittings of the Replacement Male Quick Disconnect part #SM99614 are not available so if you needed any of it's components you'd need to order the #SM99614.

view full answer...

Answer 6

You are the right track to flat towing your 2020 Jeep Cherokee Trailhawk. The Blue Ox base plate kit part #BX1143 is a confirmed fit for it and the Avail tow bar part #BX7420 is one of the easiest to use options out there so it would work really…

view full answer...

Answer 7

Yep, your 2022 Newmar Dutch Star is compatible and will work with the Demco SBS Air Force One Coiled Air Jumper Kit for Freightliner BrakeSync-Equipped Chassis #DM97ZR.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...