Option For Replacement Hinge For Sears Sport 15 CAV Rooftop Cargo Box

Question

Question:

I need to replace a hinge for Sears cargo roof top carrier Sport 15 CAV PA6 GF 35 Help

asked by: Linda P

0

Expert Reply:

We do have an option for you to replace the hinge on your Sears Sport 15 CAV rooftop cargo box, though the exact replacement is not available. That said, the best option is going to be one from SportLine:

- Replacement Spring Hinge # SR03810

I have added a cut out below of a review from a customer who used this exact hinge on their Sears Sport 15 CAV cargo box, so we do know it works, and will be the best available option for a replacement hinge.

expert reply by: Kyle S

0

Review of Replacement Hinge SR03810 on Sears Sport 15 CAV Cargo Box
(click to enlarge)

Answer 1

For your situation the easiest dolly solution we have is the Trailer Valet XL part #TVXL2. This attaches to the coupler ball and gives you an easy to turn crank which turns the wheels of the dolly allowing it to easily be moved. Standard dollies will…

view full answer...

Answer 2

To replace the mounting hardware on your Sears X-Cargo Sport 20 cargo carrier you can use the Replacement Hardware Kit #TH05603 to re-mount your cargo carrier on most factory and aftermarket roof rack crossbars. To replace the lock, you'll want…

view full answer...

Answer 3

The Sears X-Cargo boxes were indeed made by Thule and they used the same type of lock cores as Thule products. All you need to do is inspect the face of the lock core for the core's number. You can then add this number to the prefix THKEYN____ to…

view full answer...

Answer 4

According to my Thule representative, the #SR05587 is indeed the correct replacement hardware kit needed for your Sears X-Cargo model 28 roof mounted cargo carrier. Thule manufactured the X Cargo model 28 for Sears.

view full answer...

Answer 5

The Thule One-Key System Lock Cylinders - Qty 2, #TH450200, can be added to your Thule Adventurer cargo carrier. The lock kit will include 2 lock cylinders, 2 keys, and a master key that will allow you to install and remove the lock cylinders.

view full answer...

Answer 6

I spoke with my contact at Thule and was informed that for the Sears branded Sport 20-SV cargo box you would need to use hinge #TH14936. My contact also stated that both hinges should be changed at the same time for best performance. I have linked a…

view full answer...

Answer 7

The Replacement Dual Force Strut for Thule Roof Box #TH14933 will fit your Sears SUV20 cargo box. It is recommended to change both at the same time to have a better performance out of the hinge. These are a universal hinge confirmed to fit by the…

view full answer...

Answer 8

We do in fact have the replacement hardware for your Sears X-Cargo carrier. You will need the Replacement Hardware Kit for Searsbox Cargo Box #TH05603 which includes everything you need to get your Sears X-Cargo back on the road. I included a video…

view full answer...

Answer 9

You were on the right track; the Replacement Hardware Kit for Sears Cargo Boxes #TH05603 is the correct mounting hardware that you'll need to attach your Sears cargo box to the factory bars on a 2019 Subaru Forester. This is a U-bolt kit that…

view full answer...

Answer 10

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...