Determining If Equa-Flex Equalizers LC314336 Will Fit 2020 Coachmen Freedom Express 257 BHS
Question:
I specifically asked for height measurements on the MORryde 14-3/4 equalizer when I sent my last question, but was told nothing about that model, and that the LC314336 would work. I included details of the 14336 in my question because it was the only one I saw that came with detailed measurements on your site, and I was seeking the same on your MORryde. Instead of doing that, your expert told me that the LC314336 was the model for me, gave me no measurements, and basically ignored my question. So with these updated pictures clearly showing that the recommended model wont fit, could you please give me different expert advice? I knew the 14336 wouldnt fit when I wrote the last question, sent in a ton of pictures with it to show it, all I wanted was the MORryde measurements. The MORryde seems like the only one that might have an outside shot of working, depending on the measurements, so hopefully asking twice is the key to finding out.
asked by: James
Expert Reply:
Thanks for the pictures!
Since your current equalizer is 14-5/8" long the Equa-Flex Cushioned Equalizers - Double Eye Springs - Tandem Axle - 5.2K # LC314336 you were looking at will be an exact replacement.
Based on the pictures it looks like from the center of the upper hole to the center of the bottom hole is around 3", and from the center of the upper hole to the center of the bottom hole on the # LC314336 is 3-1/4" as shown in the included diagram, so it will work just fine.
I included a video of the # LC314336 for you to take a look at.
(click to enlarge)
(click to enlarge)
(click to enlarge)
(click to enlarge)
(click to enlarge)
(click to enlarge)
(click to enlarge)
Products Referenced in This Question
Curved Equalizer for 1-3/4" Wide Double-Eye Spring - 14-3/4" Long - 9/16" Center Hole
- Trailer Suspension Parts
- Standard Equalizer
- Camper
- Car Hauler
- Utility Trailer
- Double Eye Springs
- 14-3/4 Inch Long
- Tandem Axle
- Triple Axle
- Dexter
more information >
MORryde 14-3/4" Shock Absorbing Equalizers for Tandem Axle Trailers w/ 42" Wheelbase - 8K
- Trailer Suspension Parts
- Equalizer Upgrade Kit
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 14-3/4 Inch Long
- Tandem Axle
- MORryde
more information >
Product Page this Question was Asked From
Equa-Flex Cushioned Equalizers - Double Eye Springs - Tandem Axle - 5.2K
- Trailer Suspension Parts
- Equalizer Upgrade Kit
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 14-5/8 Inch Long
- Tandem Axle
- Lippert
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: MORryde 14-3/4" Shock Absorbing Equalizers for Tandem Axle Trailers w/ 42" Wheelbase - 8K
- Shop: Equa-Flex Cushioned Equalizers - Double Eye Springs - Tandem Axle - 5.2K
- Shop: Curved Equalizer for 1-3/4" Wide Double-Eye Spring - 14-3/4" Long - 9/16" Center Hole
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps
- Search Results: trailer leaf spring suspension
- Search Results: morryde shackle kit
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track - 2-1/4" Shackle Straps
- Q&A: Upgrade for Dexter Curved Equalizer 13-142
- Shop: Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3" Long
- Q&A: Upgrading Suspension Equalizers 2017 Keystone Bullet Ultra Lite 251RBS Travel Trailer 43" Wheelbase
- Video: Review of Dexter Axle Trailer Leaf Spring Suspension - Equalizers - K13-142-02
- Shop: Trailer Hitch
- Video: Review of MORryde Trailer Leaf Spring Suspension - Rubber Equalizers - MR54AR
- Search Results: trailer leaf springs
- Video: Review of Lippert Components Trailer Leaf Spring Suspension - Equalizers - LC314336
- Q&A: Torque Rating Requirements for Installing Leaf Springs on a 7000 lb Tandem Axle Trailer
- Search Results: dexter suspension kits
- Search Results: tandem axle equalizer
- Video: Lippert Equa-Flex Cushioned Equalizers Review and Installation
- Search Results: k71~384~00
- Video: Review of MORryde Trailer Leaf Spring Suspension - Rubber Equalizers - MR34AR
- Q&A: 2020 Forest River Vibe with 42inch Wheelbase Cushioned Equalizer Recommendation
- Video: MORryde Tandem Axle Trailer Suspension Upgrade Kit Installation
- Video: Review of Furrion Replacement 2-in-1 RV Range Oven Spark Igniter - FR77PR
- Q&A: Replacement Bearings, Races, Seals, and Brakes For a Dexter D35 and D44 Axle
- Q&A: Measurements of the MORryde 14-3/4" Shock Absorbing Equalizers
- Q&A: Will The MORryde MR34AR Equalizers Lift My Trailer
- Shop: Trim Kits
- Article: The 5 Best Trailer Drop Hitches You Can Buy
on Trailer Suspension Parts
James
5/13/2021
I specifically asked for height measurements on the MORryde 14-3/4 equalizer when I sent my last question, but was told nothing about that model, and that the LC314336 would work. I included details of the 14336 in my question because it was the only one I saw that came with detailed measurements on your site, and I was seeking the same on your MORryde. Instead of doing that, your expert told me that the LC314336 was the model for me, gave me no measurements, and basically ignored my question. So with these updated pictures clearly showing that the recommended model wont fit, could you please give me different expert advice? I knew the 14336 wouldnt fit when I wrote the last question, sent in a ton of pictures with it to show it, all I wanted was the MORryde measurements. The MORryde seems like the only one that might have an outside shot of working, depending on the measurements, so hopefully asking twice is the key to finding out.