Hitch Recommendation for a 2015 Ford Focus

Question

Question:

will this hitch fit my 2015 ford focus?

asked by: Shannon

0

Expert Reply:

Yes, the Curt Hitch part # C11158 that you referenced has been confirmed as a fit for your 2015 Ford Focus so I would recommend it for you.

I attached an install video for this hitch for you to check out as well.

expert reply by: Jameson C

0

Answer 1

You will need the Yakima Replacement Spine Assembly for 2 inch HoldUp Bike Racks, item #8890277, to replace the shank on your 1-1/4 inch HoldUp rack and make it work correctly in your 2 inch hitch. As an alternative you could use the Hitch Reducer 2…

view full answer...

Answer 2

The Thule T2 Pro 2 Bike Platform Rack referenced in your question is a great platform rack designed for Class I and Class II trailer hitch receivers. Since the release of the T2 Pro 2 Bike Platform Rack, Thule has made some improvements and released…

view full answer...

Answer 3

Curt recommends the stabilizer strap with non-supported loads like bike racks to help support the hitch when going over bumps to prevent some of the vertical shock from being transferred to the hitch. Curt does this as a precaution, it's not that…

view full answer...

Answer 4

Honda offers a Power Liftgate Sensor Relocation Bracket as part #08U59-TLA-100A for your 2019 Honda CR-V for when you install a hitch like the Draw Tite part #76128 so that the hands free lift gate will still function properly. That said, we've…

view full answer...

Answer 5

We had a customer with a 2017 Honda CR-V Touring just like yours who told us that the Curt hitch part #C13397 did not interfere with their hands free liftgate at all. You would not need to move any sensors.

view full answer...

Answer 6

The Curt trailer hitch for your 2018 Ford Focus is the part #C11158 is rated at a 5/10 difficulty level and should take approximately 30 minutes to install. It does require drilling to install. I attached an install video for this for you to check…

view full answer...

Answer 7

When we installed the Draw-Tite Sportframe Trailer Hitch Receiver #24872 on a 2014 Ford Focus Hatchback in our shop we found the receiver height to be 10-3/4" from the ground. The Draw-Tite Drawbar #3593 gives you a 2-1/8" rise so that…

view full answer...

Answer 8

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 9

The Curt Trailer Hitch Receiver #C11158 is going to sit right up against the bottom of the bumper fascia on your 2018 Ford Focus hatchback so it's not going to affect ground clearance too much. This Class I hitch features a tongue weight capacity…

view full answer...

Answer 10

The trailer hitch I recommend for your 2018 Ford Focus ST hatchback is the Curt Class I part #C11431 which is a confirmed fit and would work well. Currently it's the only option we have for your vehicle but it's a great USA made trailer hitch…

view full answer...

Answer 11

Since the Curt Hitch part #C11431 will mount underneath the center exhaust on your 2014 Ford Focus ST Hatch the ground clearance will be reduced. Since we haven't had that chance to install this hitch on a vehicle like yours we don't have an…

view full answer...

Answer 12

Personally I prefer the Curt Trailer Hitch Receiver #C11158 over the Draw-Tite #24872 as the Curt is made in the USA. Both these are Class I receivers with a capacity up to 2,000lbs of trailer weight and 200lbs of tongue weight. Be sure to verify the…

view full answer...

Hitch Recommendation for a 2015 Ford Focus

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching