Is MaxxFan Deluxe Model 5100k Roof Vent Available

Question

Question:

Do you carry the Maxxair model 00-5100k? If so what is the price?

asked by: Bob B

1

Helpful Expert Reply:

Yes, the MaxxFan model 5100k roof vent is indeed available and we do carry it. This is the MaxxFan Deluxe and the 5100k is the model in White, but there is also an option in Smoke if you prefer that color:

- White: MaxxFan Deluxe Roof Vent with 12V Fan and Thermostat - Manual Lift - 10 Speed # MA00-05100K

- Smoke: MaxxFan Deluxe Roof Vent with 12V Fan and Thermostat - Manual Lift - 10 Speed # MA00-06200K

The price will be on the product page of the vent, and this is a great choice for a vent because it provides everything you would ever want in a vent - it is easy to use, has 10 different speeds, a rain shield so you can use it in wet weather, and it even includes the hardware needed for mounting it.

The only other thing you might need for install if you don't have it is sealant, the Silicone Sealant # 0160297.

I have added a link below to a video review for you to check out as well of the MaxxFan Deluxe Roof Vent with 12V Fan and Thermostat # MA00-05100K.

expert reply by: Kyle S

1

Answer 1

The lift that you are speaking about (pointed out in the attached picture) for the MaxxAir MaxxFan Trailer Roof Vent #MA00-06200K is the interior trim, or otherwise known as the garnish. This is actually the piece that takes up the space that is from…

view full answer...

Answer 2

Unless the MaxxFan Deluxe Roof Vent #MA00-06200K is installed on your vehicle I wouldn't worry about a voltage regulator because the voltage will drop enough that you won't see a spike over 13.6V. If you do have the roof vent installed on…

view full answer...

Answer 3

Yes, having heavier gauge wire than needed won't be an issue at all when installing the MaxxFan Deluxe RV Roof Vent part #MA00-05100K. It's only an issue if it's the opposite situation where the wiring is too thin.

view full answer...

Answer 4

The MaxxFan Deluxe Roof Vent w/ 12V Fan and Thermostat #MA00-05100K that you referenced runs on 12 volts and draws 5 amps max. If your DC outlet can handle 5 amps then this would work but it would be right at the limit.

view full answer...

Answer 5

To replace the manual lift operator on your MaxxAir 5100k #MA00-05100K you'll want to use the Replacement MaxxAir Roof Vent Manual Lift Operator #MA10-20281K-3CF.

view full answer...

Answer 6

If you are getting 2-5/8 inches from the center of one hole to the center of the adjacent hole on your wheels then you have a 5 on 4-1/2 bolt pattern. It is hard to measure the bolt circle across the wheel if the wheel has an odd number of holes. I…

view full answer...

Answer 7

In order to replace the circuit board on a MaxxFan Deluxe 5100K #MA00-05100K you'll want to use part #MA10A21276K

view full answer...

Answer 8

14.2-14.4 volts will not destroy the MaxxFan Deluxe Roof Vent w/ 12V Fan and Thermostat #MA00-05100K, however anything over 13.8v can cause the fan to shut down on the limit switch.

view full answer...

Answer 9

The MaxxFan Deluxe Roof Vent w/ 12V Fan and Thermostat, #MA00-05100K is a manual lift 10 speed ventilation fan that is reversible and can be in the opened position without the fan running.

view full answer...

Answer 10

view full answer...

Answer 11

The MaxxFan Deluxe Roof Vent w/ 12V Fan and Thermostat #MA00-05100K referenced in your question includes the white interior trim piece (garnish), insulated electrical connectors and the hardware needed for installation. The only thing you will need…

view full answer...

Answer 12

The MaxxFan Deluxe Roof Vent #MA00-05100K requires a 12 volt power source. If there is no wiring where you are looking to install the vent you can run wire like #12-1-1 to your vehicle battery or other wiring that will allow you a 5 amp draw (which…

view full answer...