Can MaxxFan Deluxe RV Roof Vent be Wired up with 12 Gauge Wire

Question

Question:

I have presided using 12gauge wire in my RV. Can I use that wire safely to hook up my max fan that is wired with 16 gauge wire?

asked by: Beth

0

Expert Reply:

Yes, having heavier gauge wire than needed won't be an issue at all when installing the MaxxFan Deluxe RV Roof Vent part # MA00-05100K. It's only an issue if it's the opposite situation where the wiring is too thin.

expert reply by: Jameson C

0

Answer 1

The MaxxFan Deluxe Roof Vent w/ 12V Fan and Thermostat #MA00-05100K that you referenced runs on 12 volts and draws 5 amps max. If your DC outlet can handle 5 amps then this would work but it would be right at the limit.

view full answer...

Answer 2

The MaxxFan Deluxe Roof Vent w/ 12V Fan and Thermostat - Manual Lift - 10 Speed - White Item #MA00-05100K only requires 12 volt, 5 amp power to operate so based on this 12 gauge wire would be overkill but 16 gauge such as #DW02359-1 sold by the foot…

view full answer...

Answer 3

14.2-14.4 volts will not destroy the MaxxFan Deluxe Roof Vent w/ 12V Fan and Thermostat #MA00-05100K, however anything over 13.8v can cause the fan to shut down on the limit switch.

view full answer...

Answer 4

I spoke with my contact at MaxxAir regarding the MaxxFan Deluxe Roof Vent #MA00-05301K that you referenced. He stated that the printed circuit board on this unit would not be able to handle reversing the polarity. Doing this would likely burn up the…

view full answer...

Answer 5

What is the maximum amperage of the circuit for the lighting fixture you intend to use and what is the total amperage draw for the lights you have ran to that circuit? I would need to know this information in order determine if it has enough power…

view full answer...

Answer 6

The MaxxFan Deluxe Roof Vent #MA00-05100K requires a 12 volt power source. If there is no wiring where you are looking to install the vent you can run wire like #12-1-1 to your vehicle battery or other wiring that will allow you a 5 amp draw (which…

view full answer...

Answer 7

To replace the manual lift operator on your MaxxAir 5100k #MA00-05100K you'll want to use the Replacement MaxxAir Roof Vent Manual Lift Operator #MA10-20281K-3CF.

view full answer...

Answer 8

view full answer...

Answer 9

The MaxxFan Deluxe Roof Vent w/ 12V Fan and Thermostat, #MA00-05100K is a manual lift 10 speed ventilation fan that is reversible and can be in the opened position without the fan running.

view full answer...

Answer 10

If you are getting 2-5/8 inches from the center of one hole to the center of the adjacent hole on your wheels then you have a 5 on 4-1/2 bolt pattern. It is hard to measure the bolt circle across the wheel if the wheel has an odd number of holes. I…

view full answer...

Answer 11

The MaxxFan Deluxe Roof Vent w/ 12V Fan and Thermostat #MA00-05100K referenced in your question includes the white interior trim piece (garnish), insulated electrical connectors and the hardware needed for installation. The only thing you will need…

view full answer...

Answer 12

Yes, the MaxxFan model 5100k roof vent is indeed available and we do carry it. This is the MaxxFan Deluxe and the 5100k is the model in White, but there is also an option in Smoke if you prefer that color: - White: MaxxFan Deluxe Roof Vent with 12V…

view full answer...