Mounting the Replacement Wiring Harness For Factory 7-Way On a 2008 Toyota 4Runner
Question:
Ordered part HM43374 for use with 2008 Toyota 4-runner with factory tow. The electrical connection matches perfectly. But I cannot see any way to mount the unit on the factory setup. The factory unit is a triangular mount with mounting holes at 3inch separation. There is no way to use the bracket included with HM43374 to mount on the vehicle. What am I missing here?
asked by: Karl M
Expert Reply:
There is no way to reuse the same bolt holes that held on the OEM 7-way with the new Hopkins Plug-In Simple Vehicle Wiring Harness for Factory Tow Package # HM43374 on your 2008 Toyota 4Runner.
You can drill new holes if you wish to reuse the factory mounting location for the new 7-way as seen in the picture. Or you can use the bracket provided to move your trailer connection further back where it would be more accessible for you to attach as well as not pull on your trailer harness if it is not long enough when making turns.
The Curt No-Drill Bracket for 6-Way or 7-Way Round Trailer Connector Mounting Bracket # C57202 can also be utilized for a no drill mount that will wrap around the cross tube of most trailer hitches.
Products Referenced in This Question
Curt No-Drill Bracket for 6-Way or 7-Way Round Trailer Connector Mounting Bracket - Long
- Accessories and Parts
- Trailer Wiring
- Mounting Hardware
- Brackets
- 6 Round
- 7 Round
- CURT
more information >
Product Page this Question was Asked From
Hopkins Plug-In Simple Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Flat Connectors
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 7 Round - Blade
- 4 Flat
- Hopkins
more information >
Continue Researching
- Shop: Trailer Wiring
- Shop: Hopkins Plug-In Simple Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Flat Connectors
- Video: Hopkins Custom Fit Vehicle Wiring - Trailer Hitch Wiring - HM43374 Review
- Q&A: How Do You Disconnect Factory 7-way Connector On 2007 Toyota 4Runner To Install Hopkins HM43374?
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: No-Drill Mount for Electrical Mounting Bracket - Short
- Q&A: Trailer Connector for 2004 Lexus GX 470 with Factory 7-Way
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Shop: Mounting Bracket and Installation Hardware - Pollak 7-Pole, RV-Style Trailer Connector - Vehicle End
- Q&A: Trailer Wiring Recommendation for 2007 Toyota 4Runner that Has Two Connectors
- Search Results: 7 pin trailer connector
- Search Results: universal trailer wiring harness
- Search Results: tk90160
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Hopkins Plug-In Simple Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Flat Connectors
- Shop: Hopkins Endurance Quick-Install 7-Way Trailer Connector with Universal Pigtail Harness - Vehicle End
- Shop: 4' Pigtail Wiring Harness for Pollak Replacement 7-Pole RV Socket
- Q&A: What is the Difference Between 7-Way RV and Utility Trailer Connectors
- Q&A: Is 2003 Lexus GX470 Pre-Wired for Trailer Connector
- Q&A: Is Trailer Connector On Hopkins Plug-In Simple Wiring Harness for 2007 Lexus GX 470 Removeable
- Shop: Brake Controller
- Shop: Suspension Enhancement
- Video: Trailer Hitch Installation - 2004 Lexus GX 470
- Video: Pollak Pigtail Wiring Harness Installation - 2011 Ford F-150
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: brake controller
- Video: Choosing the Right Trailer Wiring
- Shop: Trailer Hitch
- Video: Choosing the Right Brake Controller
- Article: Trailer Wiring Diagrams