B&W Continuum Weight Distribution Head Assembly - 2" Shank - 2-5/16" Ball - 16K

Video Transcript for Review of B and W Weight Distribution Hitch - Head Assembly - BW48FR

Hello, everybody, this is Jeff with etrailer.com. Today we're gonna take a look at this B&W continuum weight distribution head assembly with the two inch shank and the two in five sixteenths inch diameter hitch ball. Has a 16,000 pound gross towing weight capacity. Now this is going to replace the hitch head for your B&W continuum weight distribution system. This one here will have a two inch shank, so it's gonna work as an exact replacement for the continuing systems that have the two inch shank. So it works with the part number BW 78FR and BW 88FR, which we do sell supplemental website.

Now this will work with both the over slung or the standard, as well as the underslung couplers. This will also work if you originally got a system that had a two and a half inch shank and you're now needing to use it with a two inch hitch on your vehicle. So rather than having to buy a whole new system, you can just simply switch out the head unit. This hitch head features a preset angle, so the only adjustment you might need to make is to move this head up or down along the shank here to get the correct height. Now this is gonna have the two and five sixteenths diameter ball that'll connect to your trailer coupler.

Down here will be the spindle. This'll provide the attachment points for your load bar assembly, so that the whole system is gonna work just like the original. Now we mentioned it has the height adjustment capability to make sure that your trailer's gonna be nice and level, and they do include a pinning clip back here for securing it to your hitch. If you notice also right over here, you can see the two grease CURT fittings that allow you to attach a grease gun to it so that you can lubricate that to make sure everything's well lubricated. This does have a 16,000 pound gross towing weight capacity, and a 1,600 pound max towing weight capacity, and this part is made in the USA.

(platform scrapes) But that should do it for the review on this B&W continuum weight distribution head assembly, with the two inch shank and the two in five sixteenths diameter hitch ball.