Which MORryde Equalizer Upgrade Could Fit Grand Design Reflection 337 RLS

Question

Question:

What is the the correct morryde equalizer for my 2017 Grand Design Reflection 337 RLS?? It has two axles!

asked by: Lyman H

0

Expert Reply:

If the distance between your axles on center is 42 inches then the MORryde part # MR54AR is the correct fit but if you have a different spacing let me know. A more common spacing is 33 inch like the # MR97ZR.

expert reply by: Jameson C

0

Answer 1

The Dexter suspension kits are high quality and include "wet bolts", bronze bushings instead of nylon and thick shackles. Properly maintained these would likely outlast typical factory kits three times over! To determine which kit is right…

view full answer...

Answer 2

I contacted MORryde and this does happen from time to time as the weight of the trailer can spread out the axles due to downward pressure on the springs/suspension. Odds are the 35" wheel base #MR27ZR will be the correct one for you, but they…

view full answer...

Answer 3

So to get the correct equalizer upgrade kit, the most important thing is the measurements of your current equalizers. Specifically, the width from bolt hole to bolt hole (on center), and height from bolt hole to bolt hole (on center). I have added a…

view full answer...

Answer 4

There unfortunately isn't a guide to tell us the equalizer, shackle straps, and leaf spring sizing for your 2016 Grand Design Reflection 313RLTS so you'll need to a bit a of measuring to determine the best replacements. Before measuring…

view full answer...

Answer 5

In order to confirm fit of the Road Armor Shock Absorbing Equalizer Kit part #LC696740 you simply need to measure the length of your existing equalizers from eye to eye on center. If they are 6" on center or close then the Road Armor Shock…

view full answer...

Answer 6

Most likely yes but you need to measure the distance from left to right on your current equalizers to determine if the Road Armor equalizers part #LC696740 are correct size. If they are right at 6 inches then yes this will work. The other components…

view full answer...

Answer 7

I recommend going with the MORryde AllTrek 4000 Equalizers #MR29DR over the Lippert Road Armor #LC696740 on your 2020 Coachmen Chaparral 33TSIK. With the Road Armor bolts only spread 6" on center and your current leaf spring sitting relatively…

view full answer...

Answer 8

The Road Armor Shock Absorbing Equalizer Kit part #LC696740 are taller than most other standard equalizers so you'll likely need the longer 3-1/8" shackle straps when using them, the Lippert AP Kit part #LC52SV is a go-to for this as it has…

view full answer...

Answer 9

You are correct. Since the Dexter E-Z Flex Equalizers you have on your 2021 Grand Design Reflection 337RLS measure 7-3/4" on center between the horizontal mounting holes, and the Road Armor Shock Absorbing Equalizer #LC696740 is only 6" as…

view full answer...

Answer 10

As your axles measure 35" apart from center to center but the frame hanger spread (FHS) measured 58-3/4", you did go the correct way. The axle spacing is definitely important, but the FHS is more so. Just be aware that you axle spacing may…

view full answer...

Answer 11

Thank you for the details! The Road Armor line doesn't really have anything that matches up so we'll want to look at the MORryde and Dexter Axle options. For the MORryde we have the kit #MR27ZR which is a little longer and lower but will…

view full answer...

Answer 12

To determine if the Road Armor Shock Absorbing Equalizer Kit #LC696740 will work on your 2007 Coachmen Travel Trailer you will need to take a couple measurements on your existing equalizers. These upgraded units have a width of 6 inches from hole to…

view full answer...