What Is The Maximum Thickness An Entry Door Can Be

Question

Question:

I am building my own camper. Including doors and windows. I need to know what the maximum thickness my door could be. Also, I will be ordering some slam locks for compartment storage, maybe up to 5 of the those. I understand they can all have matching keys including main entry door. So does the main entry door act as the master and the others are keyed to it? I would prefer it that way.

asked by: Rick B

0

Expert Reply:

The maximum door thickness to be able to install the Global Link RV Entry Door Locking Latch Kit with Keyed Alike Option # 295-000019 is 1-1/2".

For the optional slam latches I recommend Global Link Locking Baggage Lock Actuator Set with Mounting Plate Item # GL34FR. The lock core on this latch can be made to match other Global Link locks.

expert reply by: Shane H

0

Answer 1

The correct slam latch for your 2021 Flagstaff Super Lite 5th Wheel Trailer baggage door is going to depend on the cutout hole measurements. You can remove just the interior portion of the slam latch to see the cutout and measure it. The Global Link…

view full answer...

Answer 2

I recommend going with the Curt Trailer Hitch Receiver #C11424 for your 2017 Hyundai Elantra as long as it's a Sedan (excluding the Sport edition). I like the Curt hitches because they tend to have a thicker powder coat which helps to protect…

view full answer...

Answer 3

If you have already added the fuse and the trailer charge circuit is not activated in the 2019 Ford F-350 Super Duty with factory integrated brake controller, then you want to make sure the trailer is connected and you press the brake according to a…

view full answer...

Answer 4

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 5

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 6

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 7

I believe I have a solution for you, but I think you may need to remeasure your cutout and/or compare the measurements of your current latch with one of ours. Since latches tend to be fairly universal in size when it comes to the RV world the Global…

view full answer...

Answer 8

The Global Link RV Entry Door Locking Latch Kit #295-000019 that you referenced would be the correct fit for your 2010 Keystone Montana as this is a fit for standard RV doors like what your Montana has. I attached a review video link for this latch…

view full answer...

Answer 9

The Trailer Leaf Spring, 2250 lbs. 6 Leaf, item #e27SR, is sold as a replacement spring for older trailers and measures 26 inches for eye to eye, center to center. If you are replacing the springs and hangers you will need to use the same center to…

view full answer...

Answer 10

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...