Will Yakima Replacement Bottom Infill 8880635 Fit TracRac Ladder Rack Bottom Channel

Question

Question:

can you tell me the dimensions of this infill strip to include max width of and min width. I would like to fit the bottom slot in Thule TracRac which is 3/8th wide and 1/8th thick. Thule says they do not have any product for it.

asked by: Doug D

1

Helpful Expert Reply:

The Replacement Bottom Infill part # 8880635 was designed to fit a channel 3/8 inches in width and would easily fit a thickness of 1/8 of an inch so this would work for you although it was designed for Yakima bars.

expert reply by: Jameson C

1

Answer 1

Most of the strips we carry are sized to fit 3/8 inch channels. I specifically recommend the Rhino Rack Vortex 15-3/4, part #RRM626. These are vortex-patterned strips that will fit 3/8 inch channels and replace your existing damaged or cut strips.…

view full answer...

Answer 2

Thank you for reaching back out and clarifying that, the reason you received a response talking about a 5th wheel hitch is because base rails are a 5th wheel product. What you are needing is something different than base rails. The TracRac's…

view full answer...

Answer 3

I have a great solution for you. Unfortunately, Thule does not make a low-profile rack that will work with the Base Rails for Thule TracRac SR Sliding Truck Bed Ladder Racks #TH21610. However, a great low-profile solution is to use the Thule Roof…

view full answer...

Answer 4

I do have an option for you but the Thule TracRac SR won't work well with the Retrax Tonneau Covers even if the stake pockets are open. The rails are likely going to hit on the cover and it would likely not be able to sit flush on the bed. That…

view full answer...

Answer 5

The TracRac base rail tie-downs, part #TH25100, are pretty small so I'm not sure you'll be able to get a crossbar in them. They're 1-3/4 inches at their widest point and about 5/8 inches tall at the tallest point. Thule SquareBars are…

view full answer...

Answer 6

I recommend using the Thule UpRide Roof Bike Rack #TH599000-FB with your TracRac Crossbars #8542526002. The RockyMounts TomaHawk Roof Bike Rack #RKY1222 will only clamp to a crossbar that is up to 3-1/2" wide. The Upride #TH599000-FB includes…

view full answer...

Answer 7

The only difference between the Thule TracRac TracONE Ladder Rack #TH27000XT-500 which fits your 2014 Toyota Tacoma and the Rack #TH27000XT-501 which fits your 2022 Toyota Tacoma is the mounting kit. For your 2022 it uses the Mount Kit #TH41501 while…

view full answer...

Answer 8

For a replacement for the TracRac SR racks use #TAFX-30007-02 which is 69-1/2 inches long. It also fits TracOne, T-Rac Pro2, and UtilityRac SR ladder racks.

view full answer...

Answer 9

The slots used by the Thule Trac Rac SR are indeed different than those used by the Yakima SkyLine. The Yakima OverHaul HD is designed to clamp to the bed sides, not fit into a rail. If you already have the Revolver X4, you'll need to use the…

view full answer...

Answer 10

The Thule Hullavator #TH898 is designed to fit the same channel dimensions that your TracRac ladder rack has so there really isn't any reason the Hullavator couldn't fit the TracRac bars. TracRac is also made by Thule as well.

view full answer...

Answer 11

The dimensions of the Replacement Modular Base for TracRac Fixed Mount Ladder Rack - Left Front/Right Rear - Qty 1, #TAPT-27001, are 16 long x 3-1/2 wide x 2 Inches tall. I've attached a picture to help. This replacement base works with TracRac…

view full answer...

Answer 12

Probably the best way to describe this is to provide the dimensions of the T-portion of the bolt that fits in the slot on the TracRac crossbar. I pulled a #HD-80122 from inventory and measured it as shown in the provided photo. The threaded portion…

view full answer...