Dimensions of T-Bolt for TracRac Ladder Rack Crossbars.

Question:

Hi, What size T bold will fit in the top channel for this trac rack cross bar? Thanks,

asked by: Jeff

Expert Reply:

Probably the best way to describe this is to provide the dimensions of the T-portion of the bolt that fits in the slot on the TracRac crossbar. I pulled a # HD-80122 from inventory and measured it as shown in the provided photo. The threaded portion is 3/8 of an inch in diameter with a 16 threads per inch pitch. The T-portion measures right at 9/16 of an inch wide and just a bit larger than 1/4 of an inch deep. You can compare those dimensions to the accessory you're wanting to use.

expert reply by: Mike L