Tow Mirror Recommendation for 2021 Toyota Tundra

Question

Question:

Tow mirror recomendation for 2021 Toyota Tundra?

asked by: Mitch B

1

Helpful Expert Reply:

The best option for tow mirrors that fit your 2021 Toyota Tundra are the K-Source part # KS81300 as they are custom fit for your mirror, are very stable, easy to install, and allow you to retain the use of factory puddle lamps.

expert reply by: Jameson C

1

Installed Mirror
(click to enlarge)

Answer 1

The wires are ran to the rear of your 2018 Ford F-150 that you'll need to wire up a 7-way but they stop at a connector that's in the frame rail of the truck. So the adapter you need is the part #37185 which your 4-way will plug into and then…

view full answer...

Answer 2

Yes, the K-Source Universal Towing Mirrors #KS69ZR will indeed fit your 2021 Toyota Tundra 1794 Edition. The actual mirror sizing on the 1794 Tundra is the same as other models of Tundra, which is why these towing mirrors are a fit for your truck. I…

view full answer...

Answer 3

As all snap on custom towing mirrors, like the K-Source Snap & Zap #KS81300 for your 2021 Toyota Tundra, will snap over an existing mirror, you are going to get some vibration. If they were super snug, which would negate the vibration, they would…

view full answer...

Answer 4

Yes, the telescoping tow mirrors part #KS70103-04T that fits your 2021 Toyota Tundra do extend out further than the OEM mirrors of the truck. When all the way out these extend 23-3/4 inches from the vehicle.

view full answer...

Answer 5

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 6

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 7

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 8

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 9

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 10

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

Answer 11

It could be a tow package fuse on the vehicle. Use the owners manual to find the locations of fuses/relays related to the tow package wiring to check them and replace as needed. If the issue is not a fuse or relay then you can test the vehicle side…

view full answer...

Answer 12

Since the issue appears to be on the vehicle side for your 2017 Toyota Tacoma, I recommend first checking the connector itself. Look to see if there is any dirt or corrosion built up inside the connector that may preventing a solid connection with…

view full answer...