Replacement Hitch for 2020-2021 Chevrolet/GMC Silverado/Sierra 2500/3500HD.

Question

Question:

do you have a replacement for a acme #91708

asked by: Frank

0

Expert Reply:

The Acme 91708 is a class 5 receiver hitch for a 2020-2021 Chevrolet/GMC Silverado/Sierra 2500/3500HD.

I recommend the Curt Trailer Hitch Receiver # C96CR for a replacement. It is rated for a Gross Towing Weight of 20,000lbs and Tongue Weight of 2,700lbs. Be sure not to exceed the ratings given by General Motors.

expert reply by: Bud M

0

Answer 1

According to Air Lift, there are a few things that can cause this issue. The problem is likely an air leak between the manifold and the compressor or simply a weak compressor that would need to be replaced. To get the compressor running again so…

view full answer...

Answer 2

The Curt hitches that fit a 2020 Chevy Silverado 2500 without a factory installed hitch are actually the exact same fitments for the 2021 and 2022 model years, including their #C96CR, so you are perfectly good to go. This will also be the most…

view full answer...

Answer 3

When installing a trailer hitch on your 2022 Chevrolet Silverado 3500 HD Cab and Chassis The Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2 inch #C15800 is the correct hitch for you. This hitch is designed for heavy-duty…

view full answer...

Answer 4

Good question, and the difference is what they fit; the Curt Trailer Hitch Receiver #C15800 is designed to fit cab and chassis frames of not only a Chevy, but also Ram trucks. Cab and chassis frames are much narrower than pickup frames, which is why…

view full answer...

Answer 5

Looks like you have a service body truck/van based on your pictures. There are only multi-fit hitches that will fit that type of vehicle. I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a service body…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Replacement Hitch for 2020-2021 Chevrolet/GMC Silverado/Sierra 2500/3500HD.

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching