Tongue Weight of Curt Hitch # C11067 with 2 inch Adapter

Question

Question:

If I got this hitch and a cargo carrier that requires a 2in to 1 1/4 in adapter how much weight would I be able to put in the carrier if the cargo carrier weighs 29lbs itself

asked by: Kody M

0

Expert Reply:

When using a 1-1/4 inch to 2 inch inch hitch adapter you end up cutting the tongue weight of the hitch by 50 percent so the hitch # C11067 would have a capacity in this setup of 75 lbs.

expert reply by: Jameson C

0

Answer 1

Installing a Class l hitch limits bike carriers to 2 bikes. The trailer hitches we offer vary depending on the year of the Fiesta. For example, for 2011 through 2013 Ford Fiesta Sedan, the Curt Trailer hitch that is a fit is part #C11055. For a…

view full answer...

Answer 2

Yes, the Curt 2 Bike Platform Rack - 1-1/4" and 2" Hitches - Frame Mount - Tilting #C18085 would work well for your beach cruisers regardless of if they have fenders or not. This bike rack uses padded ratcheting hooks that clamp down on the…

view full answer...

Answer 3

The Curt 2 Bike Platform Rack - 1-1/4" and 2" Hitches - Frame Mount - Tilting #C18085 would be a great option for your 42 lb e-bike and your 2013 Toyota Prius as it's Class I hitch compatible like the hitch you have and also has enough…

view full answer...

Answer 4

We do have trailer a hitch that is compatible with the hatchback version of your 2014 Ford Fiesta it is the Curt #C11067. If you let me know what you plan on using the trailer hitch for, I can make additional recommendations if necessary.

view full answer...

Answer 5

The trailer hitch for your 2019 Ford Fiesta Hatchback is the Curt Trailer Hitch Receiver #C11067. It has a 150 lb tongue weight capacity and 1,500 lb towing capacity. Tongue weight is the combined amount of weight you can have on the hitch for when…

view full answer...

Answer 6

There really should not be any play with the Curt Trailer Hitch #C11067 that fits 2011 - 2019 Ford Fiesta hatchbacks. If you are sure this is the issue, I highly recommend taking a look at the linked installation instructions and ensuring the bolts…

view full answer...

Answer 7

Good news! The placement of the exhaust will not affect the fit of hitches on the 2015 Ford Fiesta ST since the frame of the vehicles where the hitches connect across the different models is the same. From what I was able to determine, the ST model…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...