Available Hitches For 2015 Ford Fiesta ST Hatchback

Question

Question:

Hello, Which trailer hitch would work best for my 2015 Fiesta ST? Does the trailer for the regular Fiesta also work with the Fiesta ST knowing the exhaust placement/position is different?

asked by: Jack

1

Helpful Expert Reply:

Good news! The placement of the exhaust will not affect the fit of hitches on the 2015 Ford Fiesta ST since the frame of the vehicles where the hitches connect across the different models is the same. From what I was able to determine, the ST model is the hatchback model, so we have a trailer hitch that will fit your car.

You can use the Curt Trailer Hitch Receiver # C11067. This hitch is a light-duty Class I hitch and has a 150-pound tongue weight capacity and 1,500-pound towing capacity.

I've linked an installation video of this hitch for you to check out and use as a guide if you're going to be installing this yourself.

expert reply by: Erik B

1

Answer 1

The trailer hitch for your 2019 Ford Fiesta Hatchback is the Curt Trailer Hitch Receiver #C11067. It has a 150 lb tongue weight capacity and 1,500 lb towing capacity. Tongue weight is the combined amount of weight you can have on the hitch for when…

view full answer...

Answer 2

I have a couple ideas for your to try. First the holes in the Curt Trailer Hitch Receiver #C11067 are oval and will allow for the receiver to be adjusted left to right a little to gain the clearance that is needed around the exhaust. Check to see…

view full answer...

Answer 3

We do have trailer a hitch that is compatible with the hatchback version of your 2014 Ford Fiesta it is the Curt #C11067. If you let me know what you plan on using the trailer hitch for, I can make additional recommendations if necessary.

view full answer...

Answer 4

The 2015 Ford Fiesta ST is the hatchback model, and we have a trailer hitch is confirmed to fit. You would need the Curt Trailer Hitch Receiver #C11067. The accompanying photo is of a hitch on a Fiesta; I have also added a link to an install video so…

view full answer...

Answer 5

When using a 1-1/4 inch to 2 inch inch hitch adapter you end up cutting the tongue weight of the hitch by 50 percent so the hitch #C11067 would have a capacity in this setup of 75 lbs.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

To replace your NOK AD2527E seal you can use #168233. It has an inner diameter of 1.688 inches and an outer diameter of 2.332 inches. Based on what I could find on the NOK AD2527E the inner diameter is the same and the outer diameter is 2.328 inches.…

view full answer...