Which Lift Kit Fits 2006 Airstream Safari Bambi 19 Foot

Question

Question:

Hi, Im looking to buy a lift kit for my Airstream safari Bambi 19ft 2006. Is the Dexter #11 kit would fit? Tx

asked by: Félix H

1

Helpful Expert Reply:

From previous customers with a 2006 Airstream Safari Bambi 19 foot we've determined you need the lift kit part # K71-725-02 which fits the Dexter number 11 axles.

expert reply by: Jameson C

1

Answer 1

The axle number you gave appears to be either a #10 or #11 Torflex Axle. You can confirm this by checking the bolts where it meets your frame and they will be 8 inches on center. If this is the case then you will use lift kit #K71-707-01. If…

view full answer...

Answer 2

Yes, the Torflex Lift Kit #K71-725-02 is the correct one to use on your 5th wheel trailer with tandem #12 Dexter 7K Torflex axles. This kit will provide an additional 3-1/8 inches of rise and will help level out your trailer so it isn't…

view full answer...

Answer 3

In order to choose the correct Torflex Lift Kit like part #K71-725-02 you'll need to know the axle model. The above for example is for a model #12. The model can be found on the axle tag sticker located on the axle tube. I have attached a…

view full answer...

Answer 4

Hi Bruce, To lift your trailer we'll first need to check of the suspension and see if you have torsion axles or a leaf spring suspension. If you have torsion axles then I'll need to see the axle tag in order to determine what you have…

view full answer...

Answer 5

The absolute best cushioned equalizer that fits the dimensions you mentioned having would be the MORryde ALLTREK 4000 part #MR89DR as this is only option to provide vertical and horizontal cushioning. This would make a big difference and…

view full answer...

Answer 6

Hey Doug, thanks for reaching out! The MORryde ALLTREK 4000 #MR89DR dimensions can be a bit difficult to explain via text so I've attached an image giving you the dimensions you're asking about!

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

I understand your worry Tom, and I have a couple recommendations. First is the MORryde ALLTREK 4000 Shock Absorbing Equalizers #MR89DR which has a height of 4-1/2" for the mounting bolts. This is also 6-1/2" in width like the…

view full answer...

Answer 9

Hi David; nope, the leaf springs don't need to be changed if going to the AllTrek 4000 equalizers. You just need to choose the right one based on your wheelbase (measured center-to-center of your wheels): - 33" Wheelbase: MORryde…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

It appears that your u-bolt plate on your 2021 Grand Design Reflection 31MB, will work with the SumoSprings Trailer Helper Springs #SS26MV. The plate itself including the bends does not appear to be larger than 3/4" nor does the width appear…

view full answer...

Answer 12

The AllTrek 4000 kits provide the best cushioning so if you were to upgrade from your CRE3000 kit to the Alltrek you would see a big improvement. If you have a 35 inch wheelbase you'd want the part #MR29DR or if you have a 33 inch wheelbase…

view full answer...

Which Lift Kit Fits 2006 Airstream Safari Bambi 19 Foot

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching