K-Source Snap & Zap Custom Towing Mirrors Installation - 2023 Ford F-150 Video

That's a good question and I have an even better answer. The K-Source Snap & Zap Towing Mirrors #KS69NQ are going to fit those stock mirrors on your 2023 Ford F-150 just fine. The small camera that you mentioned does alter the mounting…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

The mirrors on the 2021 Ford F-150 are parallel with the window when in the closed position so you shouldn't have any issues with the K-Source Snap & Zap Custom Towing Mirrors - Snap On - Driver and Passenger Side #KS69NQ coming into contact…

Ford redesigned their mirrors for the 2021 models so if you purchased a mirror that stated it fits a 2015 and up then it should've stated 2015 - 2020. The K-Source Snap & Zap Custom Towing Mirrors - Snap On - Driver and Passenger Side #KS69NQ…

The K-Source Snap & Zap Custom Towing Mirrors - Snap On - Driver and Passenger Side #KS69NQ are designed to work with your 2021 Ford F-150 factory mirrors and will not obstruct your factory turn signals, puddle lamps, BSDS camera, or LED…

Great question! Proposing, or the back and forth movement, typically occurs when the trailer isn't loaded properly so you have either too much or too little tongue weight, or your trailer simply isn't level. This doesn't allow the trailer…

While the K-Source Snap & Zap Custom Towing Mirrors #KS69NQ for your 2021 Ford F-150 have a secure fit and would likely be ok going through a car wash with the mirrors folded in, we recommend that you remove the mirrors. We do not recommend going…

The 1/2" Trimax Dual Purpose Coupler Lock #TMX77FR measures 4" across to the U-Shaped locking pin. We also have the 9/16" Trimax Dual Purpose Coupler Lock #TMX67FR and Trimax Dual Purpose Coupler Lock with Ballistic Grade Nylon Housing…

No, there should only be one wire coming out of the Clear Utility Light, item #507-12. There is another wire inside that light, see photo at right, that is attached to the mounting hardware for grounding the light. This requires that the light be…

If you want the highest light output for a given power input, then I suggest you go with LED-type lighting. LED lights will cost more up front, but they provide roughly 10-times the efficiency of standard incandescent lights, generate less heat and…

The Aluminum HWT Series Split Spoke Trailer Wheel #AM22318HWTB that you referenced has a 0 offset like nearly all trailer wheels do. Chances are your current trailer wheels have a zero offset as well, but you could measure to know for sure.

Your existing lamp is an Optronics #BU70CB. The lamp is sealed, so the actual bulb inside is inaccessible. If the bulb burns out, you'd need to replace the entire lamp assembly, part #BU70CB. Because this lamp is rated as a reverse light for when…