Recommended Roof Rack For 2017 Ford Explorer That Will Accommodate A Roof Top Tent

Question

Question:

Greetings, I wanted to see what options are available as far as a roof rack for a Ford Explorer 2017 Platinum Edition model. I’m looking to load a 190 lb roof top tent and need something rated for 200 lbs at STATIC weight. Could you offer some advice on this? Thanks

asked by: Hung T

0

Expert Reply:

I have a solution for you, but there are not any roof racks for your 2017 Ford Explorer that are rated for 190lbs when vehicle is in motion. I will give you a few roof rack recommendations so you are aware of your options.

If your 2017 Ford Explorer has factory raised rails running front to back then you will want to go with Inno Aero Crossbars - Aluminum - Black - 51" Long # INXB130-2 along with the necessary Feet # INXS350 and Fit Kit # IN28FR. This has the highest weight capacity available for this roof configuration which is 140lbs.

If your vehicle does not have raised rails and actually has the flush mounted rails then you can go with Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 54" Long # RRVA137B-2 along with Feet # RRRCH4 and Fit Kit # RRRCP45-BK. This has a weight capacity of 165lbs which is the highest weight capacity available for this roof configuration.

Since your tent weighs 190lbs it is not recommended to install it onto either of these roof rack setups. For a different tent option you could look into the Thule Tepui Explorer Kukenam 3 Rooftop Tent - 3 Person - 600 lbs - Haze Gray # TH8001KSK04. This tent weighs 130lbs and can sleep 3 people; it fits onto either crossbar setup without an issue. I attached demonstration videos for you to check out.

expert reply by: Andrew N

0

Answer 1

The OEM crossbars for the 2016 Ford Explorer or any aftermarket roof racks are limited to 100 lbs for non-moon roof applications or 45 lbs if you have the moon-roof. This is not due to the strength of the bars, but rather the limitations on roof…

view full answer...

Answer 2

Great questions! The Elevate Rack System is available outside of the TruXedo website - we are a great example of that. The TS Rails for TruXedo Elevate Rack System #TH65FR are compatible with a handful of tonneau covers: BAK: G2, MX4, Revolver X2,…

view full answer...

Answer 3

You are correct in your assumption. Since Ford limited your 2016 Ford Explorer's roof weight capacity to 45 lbs that means that regardless of what roof rack you install you still can only have 45 lbs of weight on it. So if you went with the Thule…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 7

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 8

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Answer 9

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 10

Thanks for all the details! We definitely have a way to get a cargo basket and an awning installed on your 2024 Toyota Highlander, although the aftermarket roof rack systems will use a clamping system with your door jambs instead of mounting via…

view full answer...

Answer 11

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Answer 12

If your 2017 Ford Explorer has the factory prep towing package installed, then you might have a brake controller plug-in wiring on the vehicle to connect your brake controller. However, not all models with the tow package had the wiring installed and…

view full answer...

Recommended Roof Rack For 2017 Ford Explorer That Will Accommodate A Roof Top Tent

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching