Parts Needed To Replace Warner Brakes On Trailer With Standard Brakes
Question:
I have a trailer with Warner brakes and I’d like to convert them to a dexter design. They are 12 x 2 with a 14.5 5 lug rim. Do you sell the necessary adapters or is that a custom item? Thanks
asked by: Glenn J
Expert Reply:
There is a way to replace the Warner Brakes on your trailer, but you will need to have a brake mounting flange welded to the axle by an axle shop as the flange needs to be perfectly parrallel to the axle.
If your axle is 2-3/4" diameter you will need the # 4-35, or if your axle is 3" diameter you will need the # 4-44-1.
You will also need to replace your current hub and drum assemblies, but to recommend the correct replacements I will need to know which inner and outer bearings your hubs use.
The easiest way to find this is by removing one of the hubs and looking for the bearing number stamped in the face of each bearing as shown in the picture of the # L44649.
If your bearings are worn to the point that you cannot read the bearing numbers you will need to use digital calipers like # PTW80157 to precisely measure your spindle according to the included diagram.
Lastly you will need to confirm the bolt pattern of your current wheels, as there are a few different 5 lug patterns. I included a link to a helpful article that goes over how to measure your bolt pattern.
If you can provide this info I would be happy to recommend all of the components you will need.
Products Referenced in This Question
Brake Mounting Flange for 2-3/8" Round Axle
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Brake Mounting Flange
- 10 Inch
- 2-3/8 Inch Diameter Axle
- Redline
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Brake Mounting Flange for 3" Round Axle
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Brake Mounting Flange
- 12 Inch
- 3 Inch Diameter Axle
- Redline
more information >
Continue Researching
- Video: etrailer Electric Trailer Brakes Installation on a 2017 Grand Design Reflection Fifth Wheel
- Search Results: warner brake
- Q&A: Replacement Brakes and Hubs for a Vintage Trailer with Warner Brakes
- Q&A: What Do Old Warner Trailer Brake Assemblies Look Like
- Q&A: Replacement 12 Inch Brake Assemblies Compatible with Old Warner Trailer Hub/Drums
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Shop: Mounting Bolts and Hardware for 12" Brake Assemblies
- Shop: Electric Trailer Brake Assembly - Self-Adjusting - 12" - Left Hand - 5,200 lbs to 7,000 lbs
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 6K
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Q&A: How to Select Replacement 6-on-5-1/2 Hubs for 1965 Airstream Safari Travel Trailer
- Q&A: Replacing Warner 12 Inch Electric Brakes & 6 Bolt Mounting Flange
- Shop: Lippert Electric Trailer Brake Assembly - 10" - Right Hand - 4,400 lbs
- Shop: Timbren Axle-Less Trailer Suspension - Standard Duty - 4" Drop - 4 Bolt Flange - 3,500 lbs
- Q&A: Will 5 Hole Brake Backing Plate fit Mobile Home Axle
- Q&A: Installation of Redline Brake Mounting Flange # 4-44-1
- Search Results: flange
- Search Results: 44649
- Article: Trailer Tire Sizing
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Trailer Wiring
- Search Results: 25580
- Search Results: 68149
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Fifth Wheel Hitch
- Shop: Gooseneck Hitch
- Search Results: dust cap
- Article: Most Popular Wheel Bearings