Winch Mount for Front Hitch of Ford Excursion Compatible with Badlands Winch

Question

Question:

What do you have or what can you suggest to mount a 12k lb Badlands winch on a front hitch mount on a 2000 Excursion. Im just interested in the physical mounting not electrical hookup.

asked by: Thad K

0

Expert Reply:

I recommend the Curt Trailer Hitch Electric Winch Mount Plate Item # C31010. I also recommend the Curt Trailer Hitch Winch Mount Handles Item # C31005 to help make it easier to connect and disconnect the winch mount plate from the receiver with the winch mounted on the plate. This setup is easy to use with the handles and has a universal bolt pattern which allows it to easily be compatible with your Badlands winch.

expert reply by: Jameson C

0

Answer 1

The Trailer and Vehicle Electric Winch Wiring Kit #BDW20207 on your Badlands 12,000 winch will work well. The 2 AWG wire will be adequate for your winch as it is confirmed to work on Superwinch winches up to 16.5k in capacity.

view full answer...

Answer 2

The Bulldog Winch Receiver Mount Kit #BDW20155 has the standard 10 x 4.5" mounting bolt pattern which will match up exactly with your Badland Apex 12000. As for the wiring, you will need to route the wire from your 4Runner battery and mount…

view full answer...

Answer 3

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The…

view full answer...

Answer 4

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…

view full answer...

Answer 5

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on…

view full answer...

Answer 6

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side.…

view full answer...

Answer 7

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 8

The Trailer Leaf Spring, 2250 lbs. 6 Leaf, item #e27SR, is sold as a replacement spring for older trailers and measures 26 inches for eye to eye, center to center. If you are replacing the springs and hangers you will need to use the same center to…

view full answer...

Answer 9

Replacement arms are available for the Roadmaster EZ5 Base Plate Kit #RM-521569-5 for your 2015 Honda Fit with the part #RM-ARMS. When the original base plate brackets and arms were manufactured, they were made as one part. To be sure that the new…

view full answer...

Answer 10

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

There is a suggested and common method for 6 function trailer wiring. You will have the following functions: Right Turn, Left Turn, Ground, Tail/marker, Brake, Battery. I have included a help article on trailer wiring that includes a diagram and…

view full answer...

Winch Mount for Front Hitch of Ford Excursion Compatible with Badlands Winch

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching