Part Needed to Cover Access Door for Eco Hitch Installation on Tesla Model 3

Question

Question:

looking for the cover/door for my tesla model 3 fascia - to hide the receiver when not in use - you speak about it in your video. do you have a part number for this item?

asked by: Marc P

0

Expert Reply:

You can use the Undercover Access Hole Cover for EcoHitch Stealth Trailer Hitch Receiver # 306-XA2002, which will keep your access hole covered. This is a magnetic piece that attaches to the hitch and keeps the inside area free from road grime and dirt.

I've linked a short review video of this part for you to check out.

expert reply by: Erik B

0

Answer 1

A hole does get cut in the lower fascia of your 2020 Tesla Model 3 to install the EcoHitch #306-X7373 but we offer a cover for the hole that you can use when the hitch isn't in use. For that you'd just need the part #306-XA2002. I…

view full answer...

Answer 2

While there is not a lock for your removable hitch receiver, it is incredibly specific. It is useless without the rest of the EcoHitch Stealth Trailer Hitch Receiver - Custom Fit - 2", part #306-X7370. It also looks like a traditional…

view full answer...

Answer 3

While there isn't a locking pin for the lower portion of the EcoHitch Stealth Trailer Hitch Receiver #EH84GR the good news is this won't be a high-theft item at all for a few reasons. Most people would not assume that it comes off as…

view full answer...

Answer 4

The big advantage you get from the Stealth hitch part #391TES317 is the detachable lower hitch opening which gives you ability to have a totally invisible setup when that's desired. For some people this is a really appealing and great option…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

There is a trailer hitch receiver as well as a 4-way wiring harness that fit your 2022 Jeep Grand Cherokee WL; that said, we don't have any way to reference a VIN so you'll need to confirm if you do have the WL, which is the new model of…

view full answer...

Answer 9

The EcoHitch #EH84GR is indeed a fit for the 2021 Tesla Model 3, it'll work great for you. When the removable receiver is detached, the hole in the underside of the bumper fascia can indeed be covered using part #306-XA2002. I've provided a…

view full answer...

Answer 10

The dimensions of the Undercover Access Hole Cover for EcoHitch Stealth Trailer Hitch Receiver # 306-XA2002 that you referenced is 8-1/2" long by 5-1/16" wide by 1/8" thick. Your hole being initially cut with a 4 inch hole saw would…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...