7 Pole Wiring Kit For Right Hand Drive 2018 Subaru Crosstrek

Question

Question:

Sir/Ma’am, I have a right hand drive 2018 Subaru XV with LED light package. I am inquiring about a universal trailer relay for a 7 pole connector. Thank you

asked by: Ken S

0

Expert Reply:

The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118467 works with a right hand drive the same as left hand drive, just the installation will be flipped around. I've included a video of the installation which will really help. Be sure to watch that! The wiring kit is for a 4-Pole but can be converted to a 7-pole using this # 30717. Pretty much a plug and play adapter.

expert reply by: Adam E

0

Answer 1

For your 2017 Subaru Crosstrek, I recommend starting with the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C56040. This installs to a factory wiring harness located behind the interior trim panel in your cargo area. You…

view full answer...

Answer 2

The yellow wire of the 7-way adapter part #30717 is an aux. circuit that typically gets used for reverse lights. If you have no use for that circuit you would not have to hook it up. You could then just tape it up and out of the way.

view full answer...

Answer 3

Yes, the Curt trailer wiring harness part #C56040 does fit your 2019 Subaru Crosstrek. This also stores in the rear cargo area when not needed so that it won't be exposed to the elements.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 8

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

The first thing you will need for your 1999 D250 is a 4-way. The Curt T-Connector Vehicle Wiring Harness #C55317 plugs into the connection points behind your rear bumper and will allow you to power your trailer's signal lights. Once the 4-way is…

view full answer...