Air Lift Air Bag Kit for 2007 Chevy Silverado 2500HD Classic with B and W Gooseneck

Question

Question:

I have a 2007 Chev. 2500 hd Classic. I have a BW Roll Over Ball Hitch already on it. Will Airlift Airbags work with the hitch?

asked by: Rick R

0

Expert Reply:

Yes we have the Air Lift LoadLifter 5000 kit part # AL88275 as a fit for your 2007 Chevy Silverado 2500HD Classic that is compatible with in-bed hitches like the B and W hitch # BWGNRK1067 that you have.

expert reply by: Jameson C

0

Answer 1

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 2

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Answer 3

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 4

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 5

Hey David, thank you for the photos and explanation! That is most definitely an Aries Grille Guard, and if it came off of a 2006 Chevy Silverado 1500 then we're looking at the part #AA4059-2 which will also fit your 2003 model by using the…

view full answer...

Answer 6

You are correct the HappiJac Camper Tie-Downs #LC182904-182971 are the correct kit for your 2013 GMC Sierra 3500 with a regular cab and 8' bed. I would highly recommend looking at the Torklift Front #TLC2215 and Rear #TLC3212 as a better option…

view full answer...

Answer 7

Yes, I checked with TorkLift and can confirm the correct set of TorkLift Custom Frame-Mounted Camper Tie-Downs for your 2019 Toyota Tundra Double Cab with 6-1/2' bed, Factory Hitch, and Running Boards (Stop at Cab) is part #TLT3306 for the rear…

view full answer...

Answer 8

You do not need to remove the bed of your truck to install the HappiJac part #LC182906-182971 that you referenced. I found a copy of the install instructions for this part number (see attached pictures) and there's no mention of the bed needing…

view full answer...

Answer 9

We don't have the specific number but what I think will be more helpful for you is the distance from the rear most portion of the bumper to the hitch pin hole. Which for the #41932 that dimension is 1-1/2 inches. Check out the picture I attached…

view full answer...