Which Hitch Will Fit a 2021 Chrysler Pacifica

Question

Question:

Looking for a 2 hitch for my 2021 Chrysler Pacifica HYBRID. Do you have one that you certify to fit?

asked by: Elaine L

0

Expert Reply:

The etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e98903 has been confirmed to fit the 2021 Chrysler Pacifica Hybrid and will provide you with a durable hitch with a 2" receiver that is ideal for either towing or carrying hitch mounted accessories.

If you're also in need of a bike rack, I've linked our entire selection of bike racks for 2" receivers for you to check out, as well as an installation video of this hitch. As of February 2021, there is not confirmed trailer wiring available for the 2021 Pacifica Hybrid.

expert reply by: Erik B

0

Answer 1

The etrailer hitch part #e98903 does fit the 2021 Chrysler Pacifica Hybrid. It's listed in two places in our fitguide as fitting the hybrid and non-hybrid models.

view full answer...

Answer 2

The etrailer.com hitch part #e98903 is a confirmed fit for your 2020 Chrysler Pacifica Hybrid and does have a couple extra steps for the hybrid models. There's an emissions canister that needs to be relocated temporarily when installing the hitch…

view full answer...

Answer 3

The Kuat Transfer 3 Bike Platform Rack part #KU24FR will work just fine with kids bikes so long as they have a wheel size of 18" at a minimum. That said, Kuat does not provide a minimum wheelbase. If you have at least 20" diameter wheels…

view full answer...

Answer 4

The 175 lb tongue weight rating is what I'm seeing in the owner's manual for your 2021 Toyota RAV4 Hybrid as well, so even though the Curt Trailer Hitch #C13416 has a tongue weight rating of 600 lbs, the 175 lb rating of your vehicle is the…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

To replace your NOK AD2527E seal you can use #168233. It has an inner diameter of 1.688 inches and an outer diameter of 2.332 inches. Based on what I could find on the NOK AD2527E the inner diameter is the same and the outer diameter is 2.328 inches.…

view full answer...