Tailgate Lock For 2005 Silverado K3500

Question

Question:

I have a 2005 K3500 Silverado truck with an 8 bed. Is there a lock for the tailgate for that truck that can be re-keyed to the factory ignition key? if not what is the part number for a lock that will work? Thank you for your time.

asked by: Allen G

0

Expert Reply:

I do have a lock that will fit your 2005 K3500 Silverado but it is not able to match the key to your vehicle keys. This Tailgate Lock # LH-003 has a nice OEM look and is a fairly simple installation. I've included a video to help you with the install!

expert reply by: Adam E

0

click to enlarge

Answer 1

Pilot and Bully are one in the same so #LH-003 will fit your 2006 Chevy Silverado 1500. The bezel by itself is not available as a separate part.

view full answer...

Answer 2

The Integrated OEM Tailgate Lock - 1999-2007 GM Full Size Pickups #LH-003 prevent the latch from pulling in when the handle is pulled. The photos you show already have the sides pulled in pretty far so they are not able to move to release the outside…

view full answer...

Answer 3

When the Integrated OEM Tailgate Lock #LH-003 is properly installed on your 2005 Chevy Silverado the locking arms will sit above the rods but below the brackets that are connected to the arms. Basically those locking arms prevent the brackets…

view full answer...

Answer 4

I checked with Pilot and they do not exclude the 2005 GMC Sierra with standard bed so you can use #LH-003 on your truck.

view full answer...

Answer 5

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

Answer 6

A drop axle certainly can make it tough to reach the star wheel adjuster on a drum brake. The adjuster spoon tool we offer #W80630 has a 90-degree bend that will often let you get access to the adjuster even on a drop axle. Essentially you will need…

view full answer...

Answer 7

I really like the Curt Trailer Hitch Receiver #C14108 for your 2005 Chevy Silverado 2500HD Short Bed because it has a hidden crosstube and is a Class IV rating so it's nice and sturdy for up to 10K trailers or 12K trailers if a weight…

view full answer...

Answer 8

The spacing will depend on the axle diameter and on which particular spring hanger kit you use. If you have a 6000 lb 3 inch diameter axle, and you're using the #APT5 hanger kit which includes 7-3/4 inch equalizers and 2-5/8 inch shackle straps…

view full answer...

Answer 9

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 10

On your 2006 Chevy Silverado 1500 there is a black junction box at the back of the floorboards and to the left of the brake pedal. If you take that cover the brake controller plugs into the top row, second spot from the left. It will be the same as…

view full answer...

Answer 11

That is correct, the Custom Underbed Installation Kit, #BWGNRK1067-5W, installs by using existing holes in the frame of your 2007 GMC 2500HD Classic so there is no drilling required to install the frame brackets. This installation kit is designed for…

view full answer...

Tailgate Lock For 2005 Silverado K3500

Featured Help Information

Miscellaneous Media

Continue Researching