Replacement Bezel for Bully/Pilot Locking Tailgate Handle on a 2006 Chevy Silverado 1500

Question

Question:

Trying to find a replacement bezel for my 2006 Chevy 1500 with a bully lock. Any ideas?

asked by: Mac M

1

Helpful Expert Reply:

Pilot and Bully are one in the same so # LH-003 will fit your 2006 Chevy Silverado 1500. The bezel by itself is not available as a separate part.

expert reply by: Michael H

1

Answer 1

I checked with Pilot and they do not exclude the 2005 GMC Sierra with standard bed so you can use #LH-003 on your truck.

view full answer...

Answer 2

The Integrated OEM Tailgate Lock - 1999-2007 GM Full Size Pickups #LH-003 prevent the latch from pulling in when the handle is pulled. The photos you show already have the sides pulled in pretty far so they are not able to move to release the outside…

view full answer...

Answer 3

I do have a lock that will fit your 2005 K3500 Silverado but it is not able to match the key to your vehicle keys. This Tailgate Lock #LH-003 has a nice OEM look and is a fairly simple installation. I've included a video to help you with the…

view full answer...

Answer 4

When the Integrated OEM Tailgate Lock #LH-003 is properly installed on your 2005 Chevy Silverado the locking arms will sit above the rods but below the brackets that are connected to the arms. Basically those locking arms prevent the brackets…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

I really like the Curt Trailer Hitch Receiver #C14108 for your 2005 Chevy Silverado 2500HD Short Bed because it has a hidden crosstube and is a Class IV rating so it's nice and sturdy for up to 10K trailers or 12K trailers if a weight…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 9

The one really big downside to gooseneck towing is that there isn't a great solution for short bed truck clearance unlike fifth wheel towing. With fifth wheel hitches you can use a slider hitch and have the clearance issue handled. With gooseneck…

view full answer...

Answer 10

On your 2006 Chevy Silverado 1500 there is a black junction box at the back of the floorboards and to the left of the brake pedal. If you take that cover the brake controller plugs into the top row, second spot from the left. It will be the same as…

view full answer...

Answer 11

That is correct, the Custom Underbed Installation Kit, #BWGNRK1067-5W, installs by using existing holes in the frame of your 2007 GMC 2500HD Classic so there is no drilling required to install the frame brackets. This installation kit is designed for…

view full answer...

Replacement Bezel for Bully/Pilot Locking Tailgate Handle on a 2006 Chevy Silverado 1500

Featured Help Information

Miscellaneous Media

Continue Researching