How to Mount E-Track Cargo Control System E19148 To Inside Wall of Enclosed Trailer

Question

Question:

How is the best way to attach the 5 ft track to the side wall of an enclosed cargo trailer. The wood liner seems way too thin. The side structure struts dont seem any too stout either

asked by: RD R

0

Expert Reply:

The Erickson E-Track Trailer Cargo Control tracks, part # E19148, are intended to mount to the structural components of a trailer. These locations provide the most secure mounting to ensure your cargo remains stable within your trailer during transport. Without a secure mounting location you will not be able to use the full 6000 pound working load limit provided by the tracks.

The attached video may be helpful; it demonstrates installation of the E-Track system in an enclosed trailer with interior wood side panels.

Trailers may vary in the number and/or placement of structural components suitable for securing items like the E-Track. One thing to consider is that while any one of the structural members in your trailer may be less sturdy than you might like, when the 5-foot E-Tracks are mounted they typically will (and should) span several of these structural parts. If you can find at least two separate structural elements to mount each track (three being better, of course) you may find that the tracks tend to support and stabilize the sides of your trailer by connecting the structural elements. You may also want to evaluate the vertical E-Track, which is available in 4-foot lengths as part # E19146. This may offer you better access to appropriate mounting points on your trailer.

The tracks may also be mounted to the trailer floor; if this location will suit your specific cargo needs you should be able to find floor mounting locations that will allow you to take advantage of the floor supports, which will be among the sturdiest parts of the trailer.

In some cases using a backing plate # e96RR will give you additional strength for your e-track installation. Please refer to the linked photo.

You will want to use 2 fasteners per linear foot as a minimum. So a 2-foot section of E-Track, for example, would require 3 fasteners per side for a total of 6. Just like the mounting point you choose, the type of fastener you select will also affect actual load capacity.

expert reply by: Adam R

0

click to enlarge

Answer 1

The Karrier ST225/75R15 Radial Trailer Tire with 15" Galvanized Wheel - 6 on 5-1/2 - Load Range D #AM32666 is ready to install when you receive it, yes.

view full answer...

Answer 2

The Karrier ST225/75r15 Radial Tire #AM32666 has a maximum psi of 65 when at the maximum load rating of 2540-lbs.

view full answer...

Answer 3

With cargo like your two classic Harleys you will want to make sure they are really well secured to prevent any damage. I recommend securing the E-Tracks to something more stable than just wood. If you are attaching the tracks to the floor I…

view full answer...

Answer 4

The height of where you install the E-track will depend greatly on where it will work best for the cargo you plan to tow. Most people put it around half way up or lower. But once again that will just depend on where it will work the best for you.…

view full answer...

Answer 5

The correct product to use to support the boards you plan on using to support the bed would be the E-Track Wood Beam Socket #59149. Since you will want to have the 2 by 4s on edge to support the plywood, and the only way the #59149 could be…

view full answer...

Answer 6

E-tracks are typically the stronger of the two, but X-track is more versatile since you can mount them horizontally or vertically. Choosing between the two really depends upon how you plan to use them. If you are installing something in a truck bed,…

view full answer...

Answer 7

Since the slot dimensions and capacity of different brands of E-Track are identical, really the only differences are the finish and the lengths the tracks are sold in. If you're using the E-Track in an area where aesthetics are important, you can…

view full answer...

Answer 8

E track like the part #E19148 (5 foot section) would work well for what you are looking to do. People use E track for car haulers all the time and it works well. We even have a wheel strap designed for E tracks, part #EM58523 which will work great.

view full answer...

Answer 9

For maximum strength of mounting E-tracks to an aluminum trailer bed you really want to go down to the frame of the trailer. I am sure the aluminum bed of your trailer is pretty strong since it is car hauler but the frame will definitely be the…

view full answer...

Answer 10

The best hitch with a 2" receiver for your 2023 Kia Sportage is going to be the etrailer Hitch item #e38KR. This hitch is custom fit and bolts directly to your Kia with included hardware. This is a class III hitch, with a 2" receiver, that…

view full answer...

Answer 11

I didn't receive your photos, but the manner in which you attach the e-track to your trailer deck will completely depend on what the deck is constructed of and where exactly on the deck you'll be placing the e-track. Without knowing any…

view full answer...

Answer 12

The Erickson Horizontal E-Track, part #E19148 has 1/4 inch diameter mounting holes spaced 2 inches apart. The screws you use should be at least long enough to go 3/4 inch into the wood you are mounting the track to. The more screws you use the more…

view full answer...