Replacement Anti-Siphon Valve for Valterra HydroFlush and Flush King Reverse Flush Valves - Plastic

See what our Experts say about this Valterra RV Fresh Water

• Recommended Backflow Preventer for 3/4 Inch Spigot
  We don't carry the 3/4 inch pvc connectors, but we do have the Camco RV Fresh Water System Backflow Preventer - 3/4" Diameter - MPT x FPT - Brass # CAM23402 designed for that same function. The Replacement Anti-Siphon Valve for Valterra HydroFlush and Flush King Reverse Flush Valves - Plastic # A01-0141VP may technically be used for that purpose as long as you are only ever using it for that purpose.
  view full answer...
• Replacement for Flush King Reverse Flush Valve for RV Holding Tanks and Sewer Hoses
  The Flush King Reverse Flush Valve for RV Holding Tanks and Sewer Hoses, # F02-4350 uses bayonet fittings to secure the lug fitting from the hose onto RV's waste valve. These are not replaceable individually. You will need to purchase a new Flush King, # F02-4350.
  view full answer...
• Is the Anti-Siphon Piece for Valterra Hydroflush Reverse Flush Adapter # F02-4100 Available
  The anti-siphon piece that comes with the Valterra Hydroflush Reverse Flush Adapter # F02-4100 is available as a replacement part. You can find it listed as part # A01-0141VP on our site. This will keep you from having to purchase the whole kit for that one piece.
  view full answer...
• Water Flow Direction of Valterra Removable Plastic Anti-Siphon Valve A01-0141VP
  The Valterra Removable Plastic Anti-Siphon Valve # A01-0141VP will allow water flow from the female black end toward the male grey end. The black portion has a directional arrow molded into it to indicate the direction of water flow.
  view full answer...
• Are Any Additional Fittings Needed for the Valterra Hydroflush # F02-4100
  The Valterra Hydroflush # F02-4100 has the bayonet male and female ends so it will sit directly in between the waste valve on your 1983 Shasta and your sewer hose. Your standard hose, like the Valterra Flushing Hose # W01-4180 then connects to the Anti-Siphon Valve # A01-0141VP (which is included) which, in turn, connects to the Hydroflush. The only time you would need an adapter on one of your hoses is if they already have some sort of adapter on them, but you could most likely remove...
  view full answer...
  
• Garden Hose Adapter for Valterra HydroFlush / Flush King
  The only replacement part we sell for the Valterra # F02-4100 flush valve is the Valterra # A01-0141VP anti siphon valve.
  view full answer...
• Anti-Siphon Valve Restricts Back Flow To Protect Fresh Water Supply
  The Valterra Removable Anti-Siphon Valve - Plastic, # A01-0141VP, is a directional valve allowing flow in only one direction. It will allow water flow from the female black end toward the male grey end. The black portion has a directional arrow molded into it to indicate the direction of water flow. This protects fresh water supply from possible back flow issues.
  view full answer...
• Recommendations For Replacing RV Water System Components
  I drew up a little diagram of how RV water systems are typically designed and attached it below to make it easier for you to see each component. I believe what you're referring to is simply just the fresh water tank drain, which you could use part # CAM22243 to tie into your tank and allow it to drain. The Anti-Siphon valve # A01-0141VP you were looking at simply connects to a Valterra Hydroflush # F02-4100 for you to hook up a garden hose and clean out your black tank. For the fresh...
  view full answer...
  

Do you have a question about this RV Fresh Water?