Wiring Harness With Four Pole Flat Connector For A Massimo Warrior UTV

Question

Question:

looking for four plug trailer light harness for massimo warrior utv

asked by: Kent A

0

Expert Reply:

They do not offer a specific wiring harness for a Massimo Warrior UTV however; you can add a universal wiring harness and splice the wires into your taillight wires. I recommend the Curt Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 60" Wire Lead Item # C58044.

expert reply by: Shane H

0

Answer 1

To verify if you will be able to use the Brophy Hitch Reducer and Extender #HR26 as both an adapter and a reducer you will need to measure your current receiver. The hitch pin center hole to the weld on the tube is 1-1/2" and 9-1/2" from…

view full answer...

Answer 2

There sure is! For a splice in kit you can use the Vehicle Wiring Harness Kit w/ 4-Pole Trailer Connector and Installation Kit #C59496 which includes everything needed to splice into the factory wiring on your 1995 Jeep Grand Cherokee Laredo without…

view full answer...

Answer 3

There are universal hardwire options for a 4-flat wiring harness that connects to your tail lights. I'm not sure if you were asking for the vehicle side or trailer side so I'll go ahead and give options for both: - Vehicle Side: Curt Vehicle…

view full answer...

Answer 4

Yes, the B and W Hitch Reducer part #BWRHXA2182 will fit the 2-1/2 inch hitch reducer in the 3 inch hitch of your 2022 Ford F-350.

view full answer...

Answer 5

Yes! The Reese Goosebox #RP85FR will also fit on a Lippert 1621HD pin box like yours, so this is the correct part. I've linked a review video of this part for you to have a look at.

view full answer...

Answer 6

We have wiring harness kits for the 2017 Nissan Armada for both the versions with or without the factory tow package wiring. All appear on the linked page. If you want a basic 4-pole wiring setup and there is no tow package wiring you will need to…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...