Recommended Trailer Hitch Receiver And Wiring Harness For 2019 Jeep Grand Cherokee

Question

Question:

Im looking for a trailer hitch receiver, and wiring. This is for a 2019 Grand Cherokee. Thanks

asked by: Joel

0

Expert Reply:

For your 2019 Jeep Grand Cherokee I recommend the etrailer Trailer Hitch Receiver # e98901 which has the highest ratings for towing at a maximum tongue weight of 600lbs, and a maximum trailer weight of 6000lbs, and the matte black powder coat finish will protect the hitch from chips and scratches to keep it looking new. Since the towing capacity of your Jeep is based on which engine you have, and if you have HD or Standard cooling, I recommend checking your owner's manual , or calling your local Jeep dealer with your VIN to confirm the towing capacity of your vehicle.

Moving on to wiring I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118727 as long as your Jeep does not have the factory towing package, or # 118384 if your Jeep has the factory towing package.

To finish up your towing setup you will need a ball mount, hitch ball, and hitch pin and clip. I recommend the etrailer Ball Mount Kit # 989900 which includes two ball mounts, two hitch balls, two hitch pins and clips, and a carrying case.

I included videos for all of the products mentioned for you to take a look at.

expert reply by: Samuel C

0

Answer 1

Basically a lot depends on what you will be using the hitch for. If it is just for accessories such as a bike rack or cargo carrier than for the most part you will be fine with a Class II trailer hitch. If you will be towing then I would go with…

view full answer...

Answer 2

As long as Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part #118727 is installed properly the wiring will not void your warranty. You are protected under the Magnuson–Moss Warranty Act which states that manufactures…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 11

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Recommended Trailer Hitch Receiver And Wiring Harness For 2019 Jeep Grand Cherokee

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching