Which Timbren Silent Ride for Extreme Mega Lite Toy Hauler with 3 inch Diameter Axles

Question

Question:

I have a extrem mega lite toy hauler with leaf spring set up and 3 inch axels the tailer is rated for 7500 lbs i want to the random silent axels will the 7000 lbs set up work for me. Thank you

asked by: Mike D

0

Expert Reply:

Since your trailer has 3 inch diameter axles the correct Timbren Silent Ride is the part # TSR7000T05.

This kit has the capacity of 7k per axle so it would easily have the capacity needed for your trailer that weighs 7,500 lbs.

expert reply by: Jameson C

0

Answer 1

Assuming your tires are in good shape without any bulges the easiest way to determine if you have a bent spindle is to take a straight edge that is longer than the tire and lay it across the tire parallel with your trailer frame and then measure the…

view full answer...

Answer 2

Going with an air ride suspension is a really smart idea, and the best upgrade for your 2022 Grand Design Solitude 346FLS 5th wheel trailer is the Lippert Center Point, which replaces your equalizers and gives you new ones with air bags in their…

view full answer...

Answer 3

For 7k axle leaf springs like what the Dexter axle part #8327860 you referenced is designed to fit you'd want the part #DX74XR which is for a 8k axle like what you almost have but would work great still even though it's a little more capacity…

view full answer...

Answer 4

Yes, our Dexter leaf spring part #DX74XR is the same as the part number 072-079-00. This is a 7-leaf spring for an 8,000 lb trailer axle that is 24-7/8 inches.

view full answer...

Answer 5

Personally Russ, if you are planning to keep your 2018 Grand Design Momentum 351M toy hauler and want to benefit from a better ride then upgrading to the Roadmaster Comfort Ride Leaf Spring Suspension Kit #RM-2460-2570 makes the most sense. If you…

view full answer...

Answer 6

Thanks for the pictures! Since your 2022 Grand Design Reflection 303RLS came with the CRE3000 equalizers you will need three of the MORryde X-Factor Crossmember item #MR33WR. It looks like you have the standard 3" wide frame hanger so all of the…

view full answer...

Answer 7

Hey Patrick, so for your leaf spring upgrade I am going to need to know a couple of things before I can get you over to the right part. Specifically, the length from eye to eye, the spring width, leaf thickness, and the number of leaves. From here I…

view full answer...

Answer 8

The Universal Group 6-Leaf Double-Eye Spring #e64SR referenced in your question is designed for 7,000 pound axles like what you have on your trailer. Most likely this will work great as a replacement, however I cannot be sure that it is a direct…

view full answer...

Answer 9

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 10

Since you have a tandem axle trailer rated for 10,500lbs the 6-Leaf Double-Eye Spring for 5,300-lb Trailer Axles #e76SR are going to be the closest leaf springs we have to that weight capacity. These springs measure 24-7/8" from center of eye to…

view full answer...

Answer 11

It does sound like you have found some clear damage to your 5th wheel trailer's leaf springs that will require attention. Uneven tire wear can be caused by a number of things - incorrect pressure, inadequate weight on the axle or a visibly…

view full answer...

Answer 12

Absolutely, the Dexter leaf spring part 072-098-00 is a double eye spring, designed for 7,000 lb axles, with a 25-1/4" eye to eye measurement. The closest leaf spring we have to that is the Double-Eye Spring part #SP-198275 which is a double eye…

view full answer...