Are There 13 Inch Wheels With a 4 on 4 Bolt Pattern

Question

Question:

Hello : Looking for a 4 Lug 4 centers Rim that Fits a 155/80R13 Tire ? Thanks

asked by: Chip

0

Expert Reply:

We do carry 13 inch wheels that have a 4 on 4 bolt pattern, but I am not aware of trailer tires that are size 155/80R13, so I can't confirm if any will fit this size wheel, as it's the tire that does have to fit the wheel. We have other sizes of trailer tire that fits a 13 inch wheel with a 4 on 4 bolt pattern, however. If you are just looking for the wheel though, you can choose from a number of different options, depending on the style you want.

- Galvanized Steel Spoke Trailer Wheel - 13" x 4-1/2" Rim - 4 on 4 # AM20224

- White Powder Coat Steel Spoke Trailer Wheel - 13" x 4-1/2" Rim - 4 on 4 # AM20222DX

- Aluminum HWT Series S5 Trailer Wheel - 13" x 5" Rim - 4 on 4 # AM22322HWTB

There are also wheel and tire combos that have a 13 inch wheel with a 4 on 4 bolt pattern and size ST175/80D13 tires, which measure 24" diameter and 6.6" wide.

For that there is the Loadstar ST175/80D13 Bias Trailer Tire with 13" Galvanized Wheel # AM3S130 or White Wheel # AM3S120.

I have added links below to a number of video reviews as well as a link to our entire selection of 13 inch wheels with a 4 on 4 bolt pattern.

expert reply by: Kyle S

0

Answer 1

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 2

For the LCI52-SB-86.5-68.5, the two ending measurements are: 1st - measurement from hub to hub, meaning the length of the axle in this case is 86.5 inches. 2nd - spring seat dimension where they're welded, meaning the spring seats are 68.5…

view full answer...

Answer 3

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex…

view full answer...

Answer 4

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 5

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 6

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 7

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 8

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 9

While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular grease…

view full answer...

Answer 10

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 11

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

Answer 12

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Are There 13 Inch Wheels With a 4 on 4 Bolt Pattern

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching