Installation Instructions for Timbren Suspension System on a 2012 Nissan Frontier Pro4X 4x4 Off Road

Question

Question:

Hi, I have a Nissan Frontier 2012 Pro4x 4x4. What do I have to do to install these on this truck? Thank you

asked by: Dan

0

Expert Reply:

To install the Timbren Rear Suspension Enhancement System, # TTORTUN4L, on your 2012 Nissan Frontier Pro4x 4x4 you will need to safely raise the vehicle to allow the axle to hang freely, then loosen the axle u-bolts and remove the OEM rubber bump stop.

Next, install the lower bracket from the Timbren kit where the OEM bump stop was.

Finally, tighten the U-bolts and safely lower the vehicle.

I have attached installation instructions for you to review.

expert reply by: Robert G

0

click to enlarge

Rick S.

1/29/2013

Bob,I have over 10K Installed miles driving with the Timbrens installed on my Pro4X which you have pictured hooked up to my Jayco X17X. The product has worked as advertised and so far I am a happy customer. Unloaded the truck acts stock, loaded you know the Timbrens are working,Let me know if I can help with providing more pictures or information regarding this product and my Nissan Pro4X.ThanksRick

Reply

Patrick B.

2/8/2013

Thanks for the feedback, glad the Timbrens are working well for you.

Reply

Answer 1

It sounds like you're looking for the Timbren Active Off-Road Bumpstops part #TABSOSR which are a fit for a 2020 Nissan Frontier. These are great for towing or hauling and will work to reduce sag/squat without minimizing axle travel.

view full answer...

Answer 2

When installing any Timbren system on the 2019 Toyota Tacoma you should have about 1/2" to 1-1/2" between the frame and the spring after installation. You won't necessarily be losing wheel travel when you use a Timbren Rear…

view full answer...

Answer 3

The Timbren Active Off-Road Bumpstops - Rear Suspension - 3,600 lbs #TABSTRFK have bump stops and mounts that are 5-1/2 inches tall overall and u-bolts that are 8-1/4 inches long and 3-3/4 inches on center. I've attached a photo to assist.…

view full answer...

Answer 4

The Timbren Rear Suspension Enhancement Systems #TTORTUN4L and #TABSOSR are designed for a very high weight capacity at either 3,000lbs or 3,600lbs of capacity which will explain for the hard hits that were described. The 1,000lb Blue SumoSprings…

view full answer...

Answer 5

Timbren helper springs #TTORTUN4L are designed to fit on 2014 Nissan Frontier 4x4 trucks that have the leaf spring stack on top of the rear axle. Take a look at the installation instructions I have linked for you for more on how they install. I have…

view full answer...

Answer 6

If your 2012 Nissan Frontier has a 1.5" lift and you are looking to install the Timbren Active Off-Road Bumpstops #TABSOSR, you will need the 1" Spacer #A25723-90AH00. It should be noted that the included bolt should be long enough to…

view full answer...

Answer 7

I have a great rear suspension enhancement solution for you. I checked in with both our air bag manufacturers (Air Lift and Firestone), and they currently do not have an air bag system designed to fit your rear axles of your 2022 Nissan Frontier Pro.…

view full answer...

Answer 8

The 3,000 lbs of additional suspension support that the Timbren kit part #TTORTUN4L can provide will make a big difference on your 2015 Nissan Frontier Crew Cab which this kit is confirmed as a fit for. This gives the rear suspension an additional…

view full answer...

Answer 9

I went out and pulled both the Timbren kit part #TTORTUN4 and #TTORTUN4L from our warehouse to measure them for you and found that they both sit exactly 3-3/4 inches tall.

view full answer...

Answer 10

The Timbren kits like the #TTORTUN4L that you referenced do not raise the suspension of the vehicles they install on. They only reduce sag when the vehicle has weight on it from either a trailer tongue or cargo. There will be about 1.5 inches of…

view full answer...

Answer 11

We do have the Timbren Rear Suspension Enhancement System #TTORTUN4 for your 2005 Toyota Tacoma Pre-Runner 2wd. This kit has a rated capacity of 6,000lbs to reduce sag and improve stability. We also have the Timbren Active Off-Road Bumpstops #TABSOSR…

view full answer...

Answer 12

Hey Tarek, for your 2023 Ford Raptor I recommend checking out the Timbren Suspension Enhancement System #T75MR. This suspension enhancement system has a load leveling capacity of 3,000 lbs, will increase stability while reducing sag, and will install…

view full answer...